ANSI B18.2.3.2M

METRIC FORMED HEX SCREWS

English 1995
0.000
ANSI
Detailed Information

1.1 This standard covers the complete general and dimensional data for metric formed hex screws recognized as American National Standard. Formed hex screws are cold formed products with fully upset (non-trimmed) heads. Formed hex screws are standard only in sizes M5 thru M24, with lengths up to 150 mm, or 10 times nominal screw size, whichever is shorter.
1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the sizes in conjunction with the various options described herein are stock items. Consumers are requested to consult with manufacturers concerning lists of stock production formed hex screws.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 653
1986
English

Knurled thin thumb screws

Where knurled thumb screws of sizes not less than M 2 shall be supplied threaded up to the head, letter A as specified in DIN 962 shall be stated in the designation (see example of designat […]
DIN EN 28675
1992
English

Hexagon thin nuts with metric fine pitch thread – Product grades A and B (ISO 8675 :1988) English version of DIN EN 28675

This International Standard gives specifications for hexagon thin nuts, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 64 mm, with product grad […]
DIN
DIN 7349
1974
English

Plain Washers – for Bolts with Heavy Clamping Sleeves

For heavy clamping sleeves, see DIN 1481.
MIL
MIL-DTL-18240F
1997
English

FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250°F MAXIMUM

This specification defines the requirements for self-locking elements for use in externally threaded fasteners such as bolts and screws to be used in fasteners with either UNC, UNJC, UNF, U […]
ISO
ISO 7049
1983
English

Cross recessed pan head tapping screws

This International Standard specifies the characteristics of cross recessed pan head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
JIS
JIS B 1107
2004
English

Hexalobular socket head screws

This Standard specifies the characteristics of hexalobular socket head screws in product grades A and with nominal thread sizes from M2 up to and including M10. If other specifications tha […]
JIS
JIS B 1009
1991
English

Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts

This Japanese Industrial Standard specifies nominal lengths to be applied to external thread parts of bolts, machine screws, etc. to be used generally and thread lengths for general purpose […]
ASTM
ASTM A108
2007
English

Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

1.1 This specification covers cold-finished carbon and alloy steel bars produced in straight length and coil to chemical compositions. Cold-finished bars are suitable for heat treatment, fo […]
EN ISO
EN ISO 3506-1
1997
English

Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs

This pan of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic grades of corrosion-resistant stainless steels when tested o […]