ANSI B18.2.3.7M

METRIC HEAVY HEX STRUCTURAL BOLTS

English 1995
0.000
ANSI
Detailed Information

1.1 This standard covers the complete general and dimensional data for metric heavy hex structural bolts recognized as American National Standard.
1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the sizes in conjunction with the various options described herein are stock production items. Consumers are requested to consult with manufacturers concerning lists of stock production heavy hex structural bolts.

Download File
(Log in to download spec.)

Check out other specifications

MIL
MIL-DTL-16232G
2000
English

PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE

This specification covers two types of heavy phosphate coating for ferrous metals, applied by immersion. The coatings consist of a manganese phosphate or zinc phosphate base and, when speci […]
ISO
ISO 4775
1984
English

Hexagon nuts for high-strength structural bolting with large width across flats – Product grade B – Property classes 8 and 10

This International Standard gives specifications for large series hexagon, high-strength structural nuts with metric dimensions in property classes 8 and 10 and thread sizes from M12 up to […]
ASTM
ASTM A434
2004
English

Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

1.1 This specification covers hot-wrought and cold-finished quenched and tempered alloy steel bars. 1.2 Hot-wrought bars are available in three strength level classes designated BB, BC, and […]
Custom
General Motors | GM6046M
2005
English

Corrosion Protective Coatings Fluorocarbon Type

This specification covers the basic requirements for fluorocarbon post treatments. It is supplied in black color unless otherwise specified.
SAE
SAE AS8879
2001
English

Screw Threads – UNJ Profile, Inch

This SAE Aerospace Standard (AS) specifies the characteristics of the UNJ profile inch series of screw threads, to include a mandatory controlled radius of 0.18142P to 0.15011P at the root […]
DIN
DIN 50021
1988
English

Salt spray testing

This standard specifies the requirements which corrosion testing apparatuses and corrosive agents must meet in salt spray testing, the aim being to enable identical conditions to be reprodu […]
DIN
DIN 985
1987
English

Prevailing torque type hexagon thin nuts with nonmetallic insert

This standard specifies requirements for M 3 to M 48 prevailing torque type hexagon nuts with nonmetallic insert, assigned to product grade A for sizes up to M 16 and product grade B for si […]
DIN
DIN 835
1995
English

Studs with a length of engagement equal to about 2 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in aluminium alloys. As specified in DIN 267-2, the stud end thread shall be produced […]
ISO
ISO 7045
1994
English

Pan head screws with type H or type Z cross recess — Product grade A

This International Standard specifies the characteristics of pan head screws of product grade A, with threads from M1,6 to M 10 inclusive, and with type H or type Z cross recess.