ANSI B18.2.4.5M

METRIC HEX JAM NUTS

English 1990
0.000
ANSI
Detailed Information

1.1 This standard covers the complete general and dimensional data for metric hex jam nuts recognized as American National Standard.
1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the nut sizes in conjunction with the various options described herein are stock items. Purchasers are requested to consult with manufacturers concerning lists of stock production hex jam nuts.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7981
1984
English

Cross recessed pan head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000-2-1 tabular layout of article characteristics shall apply for scre [...]
ISO
ISO 3506-2
2009
English

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts

This part of ISO 3506 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient [...]
DIN
DIN 6900-2
1990
English

Screw and washer assemblies – Coarse threaded screws with captive wave spring washer

This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive wave spring [...]
JIS
JIS B 0123
1999
English

Designation system for screw threads

This Japanese Industrial Standard specifies designation for screw threads used in the Standards referring the principle of screw thread and the Standards referring the products having screw thread.
ISO
ISO 1481
1983
English

Slotted pan head tapping screws

This International Standard specifies the characteristics of slotted pan head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
ANSI ASME
ANSI/ASME B18.1.3M
1995
English

METRIC SMALL SOLID RIVETS

1.1.1 This standard covers complete general and dimensional data for those types of metric small solid rivets recognized as American Nalional Standard. Included is an appendix covering formulas [...]
DIN
DIN 1469
1978
English

Grooved Pins, Half Length Grooved with Gorge

Grooved pins according to this Standard are positive or non-positive connecting elements. They are used for holding retaining rings, retaining washers, springs, etc., the grooved pin being seat [...]
ASTM
ASTM F468M
1997
English

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws. and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of a [...]
ASME
ASME Draft B18.2.4.1M
1999
English

METRIC HEX NUTS, STYLE 1

This standard covers the complete general and dimensional data for metric hex nuts, Style 1, recognized as American National Standard.