ANSI B18.22M

METRIC PLAIN WASHERS

English 1990
0.000
ANSI
Detailed Information

This standard covers general specifications and dimensions for flat, round hole washers, both soft (as fabricated) and hardened, intended for use in general purpose applications. The inclusion of dimensional data in this standard is not intended to imply that all sizes displayed are production stock items. Manufacturers should be contacted for current information on stock sizes.

Download File
(Log in to download spec.)

Check out other specifications

BS EN ISO
BS EN ISO 2768-2
1989
English

General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications

This part of ISO 2768 is intended to simplify drawing indications and specifies general geometrical tolerances to control those features on the drawing which have no respective individual indic [...]
DIN
DIN 933
1987
English

M 1,6 to M 52 hexagon head screws threaded up to the head – Product grades A and B

This standard specifies requirements for M1,6 to M52 hexagon head screws threaded up to the head, assigned to product grade A, for sizes up to M24 and length not exceeding 10d or 150mm, and to [...]
DIN
DIN 6914
1989
English

High-strength hexagon head bolts with large widths across flats for structural steel bolting

High-strength hexagon head bolts are intended for use in GV and SL structural steel bolting in accordance with DIN 18800 Part 1, together with DIN 6915 hexagon nuts and DIN 6916, DIN 6917 or DI [...]
DIN EN
DIN EN 20898-2
1994
English

Mechanical properties of fasteners – Nuts with coarse pitch thread and specified proof load values (ISO 898-2 : 1992) English version of DIN EN 20898 Part 2

This International Standard specifies the mechanical properties of nuts with specified proof load values when tested at room temperature (see ISO 1). Properties will vary at higher and lower te [...]
JIS
JIS B 1054-2
2001
English

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2 : Nuts

This part of JIS B 1054 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic grades of corrosion- resistant stainless steels when tested over an ambient temp [...]
ISO
ISO 3506
1979
English

Corrosion-resistant stainless steel fasteners – Specifications

This International Standard gives specifications for bolts, screws, studs and nuts made from austenitic, ferritic and martensitic grades of corrosion-resistant stainless steels.
ASTM
Abstract of ASTM A307
2000
English

CARBON STEEL EXTERNALLY THREADED STANDARD FASTENERS

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs, in sizes 1/4 in. through 4 in. The fasteners are designated by "Grade" de [...]
JIS
JIS B 1014
1994
English

Countersunk flat head screws— Part 2 : Penetration depth of cross recesses

This Standard specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).
DIN EN
DIN EN 24016
1992
English

Hexagon head bolts – Product grade C (ISO 4016 :1988) English version of DIN EN 24 016

This International Standard gives specifications for hexagon head bolts with threads from M5 up to and including M64 of product grade C. If, in special cases, specifications other than those l [...]