ASME/ANSI B18.3.6M

METRIC SOCKET SET SCREWS

English 1993

0.000

Detailed Information

1.1.1 This standard contains complete general and dimensional requirements for metric series socket set screws of nominal sizes from 1.6 mm to 24 mm recognized as American National Standard. Also included are appendices covering formulas for dimensions, part numbering system and preferred sizes for government use and thread dimensions.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 6900-5

1990

English

Screw and washer assemblies – Coarse threaded screws with captive conical spring washer

This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M 12 screw with flat bearing face, assigned to property classes 8.8 up to and including 10.9, and a [...]

DIN

DIN 8195

1977

English

Design and selection of chain drives

1.1 This standard contains capacity rating charts and gives recommendations on the selection of chain drives, composed of roller chains and chain wheels conforming to DIN 8187 and DIN 8188, and [...]

ASTM

ASTM F880M

1997

English

Standard Specification for Stainless Steel Socket Set Screws [Metric]

1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SS5), sizes M 1.6 through M 24, having Property Classes A 1-50 and A 1-70.

DIN EN

DIN EN 493

1991

English

Fasteners – Surface discontinuities – Nuts – English version of DIN EN 493: 1992

1.1 This European Standard establishes limits for various types of surface discontinuities on nuts with - nominal thread diameters from 5 up to and including 39 mm - product grades A and B - al [...]

DIN

DIN 660

1993

English

Round head rivets with nominal diameters from 1 to 8 mm

This standard specifies dimensions of steel and nonferrous metal round head rivets with nominal diameters from 1 to 8 mm.

ISO

ISO 965-1

1980

English

ISO general purpose metric screw threads – Tolerances – Part 1 : Principles and basic data

This International Standard specifies a tolerance system for screw threads conforming to ISO 261, ISO general purpose metric screw threads - General plan. The tolerance system refers to the bas [...]

DIN

DIN 964

1970

English

Slotted Raised Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)

Intermediate lengths should as fer as possible be avoided. Lengths over 60 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quote [...]

IFI

IFI-117

2008

English

PULL THROUGH MANDREL BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements for inch series pull through mandrel blind rivets suitable for use in engineering assemblies where load trans [...]

DIN

DIN 267-1

1982

English

Fasteners – Technical delivery conditions – General requirements

This standard applies to standardized fasteners (mainly bolts, screws, nuts and similar threaded and formed parts) as finished components in the condition on delivery, in so far as no special s [...]