ASME B18.10

TRACK BOLTS AND NUTS

English 2006
0.000
ASME
Detailed Information

This Standard covers the complete general and dimensional data for inch series oval neck and elliptic neck track bolts and square nuts intended for use with these bolts, and recognized as an American National Standard.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7981
1984
English

Cross recessed pan head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000-2-1 tabular layout of article characteristics shall apply for screws in accordance with this standard.
DIN
DIN 127
1987
English

Spring lock washers with square ends or tang ends

Spring lock washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assembl […]
DIN
DIN 7168
1991
English

General tolerances for linear and angular dimensions and geometrical tolerances (not to be used tor new designs)

This standard is intended to ensure that all drawings prepared to date In which general tolerances have been specified on the basis of DIN 7168 will remain intelligible and be interpreted correctly, and also to inform the user of this standard that, for all new designs, tolerances are to […]
ASTM
Abstract of ASTM F912M
1997
English

ALLOY STEEL SOCKET SET SCREWS [METRIC]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M 1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 Property Class 45H.
ASME
ASME B18.5
2008
English

ROUND HEAD BOLTS (INCH SERIES)

1.1.1 This Standard covers the complete general and dimensional data for the various types of inch series bolts generally classified as round head bolts and recognized as American National Standard. 1.1.2 The inclusion of dimensional data in this Standard is not intended to imply that al […]
DIN
DIN 551
1972
English

Slotted Set Screws with Chamfered Ends

Compared with the April 1956 issue, the following amendments and additions should be noted: a) In agreement with the international selection of threads for screws and bolts, the sizes M 1.6, M 1.9 and M 2.5 have been included. The sizes M 1.7, M 2.3 and M 2.6 have been barred for new desi […]