ASME B18.12

GLOSSARY OF TERMS FOR MECHANICAL FASTENERS

English 2001
0.000
ASME
Detailed Information

This standard is a summary of nomenclature and terminology currently used to define and/or describe mechanical fasteners, related characteristics, and the manufacturing processes that produce these products. Utilization of these terms by manufacturers and consumers is intended to reduce or eliminate confusion and serve as a sound basis for communication.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 262
1973
English

ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts

This International Standard specifies ISO general purpose metric screw threads for screws, bolts and nuts in the diameter range 1 to 39 mm. These selected sizes are recommended also for general engineering use. These screw threads are selected from ISO 261, ISO general purpose metric sc […]
JIS
JIS B 1055
1995
English

Tapping screws—Mechanical properties

This Japanese Industrial Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2.2 to ST8 inclusive in accordance with ISO 1478, together with the corresponding test methods.
ASTM
Abstract of ASTM B766
1998
English

ELECTRODEPOSITED COATINGS OF CADMIUM

1.1 This specification covers the requirements for electrode posited cadmium coatings on products of iron, steel, and other metals. NOTE 1 - Cadmium is deposited as a coating principally on iron and steel products. It can also be electrodeposited on aluminum, brass, beryllium copper, copp […]
ASTM
ASTM F901
2001
English

ALUMINUM TRANSMISSION TOWER BOLTS AND NUTS

1.1 This specification covers aluminum structural bolts and nuts for use in the construction of aluminum transmission towers, substations, and similar aluminum structures. 1.2 Diameters of bolts and nuts furnished to this specification are 5/8, 3/4, and 7/8 in. 1.3 The values stated in in […]
ASTM
ASTM A307
2010
English

CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs in sizes 1/4 in. through 4 in. The fasteners are designated by “Grade" denoting tensile strength and intended use, as follows: Grade | Description Grade A | Bolts and st […]
JIS
JIS B 1085
1995
English

Cone proof load test on nuts

This Standard specifies the properties of nuts with — nominal thread diameter, d, from 5 mm up to and including 39 mm, — product grades A and B, — property classes 8 to 12, under the conditions of the cone proof load test.