ASME B18.16.3M
DIMENSIONAL REQUIREMENTS FOR PREVAILING-TORQUE TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS
English
1998
0.000
Detailed Information
This standard covers the complete general and dimensional data for metric prevailing torque hex nuts, Table 1, and hex flange nuts, Table 2.
Download File
(Log in to download spec.)
Check out other specifications
1985
English
Square head bolts with collar
This standard specifies product grade A square head bolts with collar and M 5 to M 24 coarse thread. Where, for special purposes, the bolts are to meet requirements differing from those specified in the present standard, e. g. in respect of nominal length or property class, the specificat […]
2007
English
QUENCHED AND TEMPERED ALLOY STEEL BOLTS, STUDS, AND OTHER EXTERNALLY THREADED FASTENERS
This specification covers the chemical and mechanical requirements of quenched and tempered alloy steel bolts, studs, and other externally threaded fasteners 4 in. and under in diameter for application at normal atmospheric temperatures, where high strength is required and for limited app […]
2010
English
ALLOY-STEEL AND STAINLESS STEEL BOLTING MATERIALS FOR LOW-TEMPERATUR SERVICE
1.1 This specification covers alloy steel bolting materials for pressure vessels, valves, flanges, and fittings for low-temperature service. See Specification A962/A962M for the definition of bolting. The bars shall be hot-wrought and may be further processed by centerless grinding or by […]
1974
English
Tangential keys and Tangential Keyways for Constant Loads
The present Standard corresponds in subatanct to the ISO Draft lSO/DIS 3117-1973 Tagential keying Clavetage par clavettes tangentielles As compared with the April 1924 lssue of DIN 271, the following amendments and additions should be noted: a) The shaft diameters were partly changed to c […]
1987
English
Hexagon nuts with metric coarse and fine pitch thread – Product classes A and B
This standard specifies requirements for M1 to M160 hexagon nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). lf, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding property class, the […]
1988
English
Hexagon head screws with metric fine pitch thread – Product grades A and B
This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diameters from 8 to 24 mm and nominal lengths, l, up to and including 10 d or 150 mm, whichever is sh […]