ASME B18.2.3.4M

METRIC HEX FLANGE SCREWS

English 1999
0.000
ASME
Detailed Information

1.1 This standard covers the complete dimensional and general data for metric series hex flange screws recognized as American
National Standard.
1.2 The inclusion of dimensional data in this standard is not intended to imply that all products described are stock production items. Consumers should consult with suppliers concerning availability of products.

Download File
(Log in to download spec.)

Check out other specifications

SAE
SAE J531
2020
English

Automotive Pipe, Filler, and Drain Plugs

This SAE Standard includes complete general and dimensional specifications for those types of pipe, filler, and drain plugs (shown in Figures 1 to 6 and Tables 1 to 4) commonly used in automoti [...]
JIS
JIS B 1013
1994
English

Countersunk head screws— Head configuration and gauging

This Standard specifies the characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid down in the resp [...]
ASTM
Abstract of ASTM F871M
1991
English

ELECTRODE POSITED COATINGS ON METRIC THREADED COMPONENTS

1.1 This specification covers dimensional requirements for electrodeposited coating on threaded fasteners with M metric threads. It establishes a service condition classification for these fast [...]
DIN
DIN 431
1982
English

Pipe nuts with thread in accordance with DIN ISO 228 Part 1

This standard gives specifications for (hexagon and octagon) pipe nuts with thread in accordance with DIN ISO 228 Part 1 of nominal sizes G 1/8 up to and including G 6, assigned to product grad [...]
DIN
DIN 267-15
1983
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Muttern mit Klemmteil

Die in dieser Norm aufgeführten Festigkeitsklassen, die mechanischen und funktionellen Eigenschaften und die Prüfverfahren gelten für Muttern mit Klemmteil - mit Gewinde-Nenndurchmesser von 3 b [...]
DIN EN
DIN EN 1665
1998
English

Hexagon bolts with flange – Heavy series – English version of DIN EN 1665

This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.
ASTM
Abstract of ASTM F468M
1993
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE [METRIC]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of a [...]
DIN
DIN 434
1990
English

Square taper washers for use with channel sections

Washers as specified in this standard are intended for use in structural bolting of channel sections using bolts up to property class 5.6.
BS EN
BS EN 10025-6
2009
English

Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (chemic [...]