ASME B18.2.8
CLEARANCE HOLES FOR BOLTS, SCREWS, AND STUDS
English
1999
0.000
Detailed Information
This standard covers the recommended clearance hole sizes for #0 through 1.5 inch fasteners in three classes of clearance using a close-, normal-, and loose-fit category.
Download File
(Log in to download spec.)
Check out other specifications
2001
English
Standard Classification System for Rubber Products in Automotive Applications
1.1 This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. 1.2 This classification syst […]
1986
English
Slotted raised countersunk (oval) head wood screws
The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other standards on wood screws. b) Type g has been replaced by product grade C. c) The content of the […]
1990
English
Hexagon washer head tapping screws
Hexagon washer head tapping screws are made with a DIN 7970 tapping screw thread that complies with the specifications of International Standard ISO 1478 :1983). It should be noted that, since 1983, tapping screw threads have been identified with the symbol ST (denoting ‘spaced thread') w […]
2001
English
ALUMINUM TRANSMISSION TOWER BOLTS AND NUTS
1.1 This specification covers aluminum structural bolts and nuts for use in the construction of aluminum transmission towers, substations, and similar aluminum structures. 1.2 Diameters of bolts and nuts furnished to this specification are 5/8, 3/4, and 7/8 in. 1.3 The values stated in in […]
2003
English
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
This Standard specifies the requirements for case hardened and tempered metric thread rolling screws. Thread rolling screws according to this Standard produce female threads which fit general purpose metric screw threads, in the range from 2 mm up to and including 12 mm nominal thread dia […]