ASME B18.31.3

THREADED RODS (INCH SERIES)

English 2009
0.000
ASME
Detailed Information

This Standard covers the complete general and dimensional data for inch series threaded rods recognized as American National Standard. Included are diameters #4 through 4 in. UNC, UNF, 8UN, and ACME in both right-and left-handed threads.

At this time, there are no ISO standards for inch threaded rods.

The inclusion of dimensional data in this Standard is not intended to imply that all of the products described herein are stock production sizes. Consumers should consult with suppliers concerning lists of stock production sizes.

Download File
(Log in to download spec.)

Check out other specifications

BS EN
BS EN 10027-1
2016
English

Designation systems for steels Part 1: Steel names

This European Standard specifies rules for designating steels by means of symbolic letters and numbers to express application and principal characteristics, e.g. mechanical, physical, chemical, [...]
ASTM
ASTM F959
2009
English

COMPRESSIBLE-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH STRUCTURAL FASTENERS

1.1 This specification covers the requirements for compressible-washer-type direct tension indicators capable of indicating the achievement of a specified minimum bolt tension in a structural b [...]
ASTM
ASTM F912M
1997
English

Standard Specification for Alloy Steel Socket Set Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket set screws (SSS) M1.6 through M24 sizes having hardnesses 45 to 53 HRC, ISO 898/5 property class 45H.
NASM
NASM 16535
1999
English

RIVET-TUBULAR, OVAL HEAD

DOUBLE SHEAR STRENGTH CARBON STEEL RIVETS 32,000 PSI MIN. BRASS RIVETS 35,000 PSI MIN. ALUMINUM RIVETS (2117) 26,000 PSI MIN. ALUMINUM RIVETS (5056) 24,000 PSI MIN. NICKEL ALLOY (MONEL) RIVETS [...]
ASME
ASME B18.2.3.1M
1999
English

METRIC HEX CAP SCREWS

1.1 This standard covers the complete general and dimensional data for metric series hex cap screws recognized as American National Standard. 1.2 The inclusion of dimensional data in this stand [...]
IFI
IFI-553
1999
English

METRIC DRIVE PIN BLIND RIVETS

This standard establishes the requirements for metric drive pin blind rivets suitable for use in joining the component parts of an assembly.
DIN
DIN 6886
1967
English

Stressed-type Fastenings with Taper Action – Taper Keys – Keyways – Dimensions and Application

For the time being no permissible variations have been laid down for the taper on the key and in the hub keyway. If special conditions make necessary the observance of certain permissible varia [...]
ASTM
ASTM D610
2008
English

Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

1.1 This practice covers the evaluation of the degree of rusting on painted steel surfaces. The visual examples which depict the percentage of rusting given in the written specifications form p [...]
JIS
JIS B 0212
1973
English

Limits of sizes and tolerances for unified fine screw threads

This Japanese Industrial Standard specifies limits of sizes and tolerances for unified fine screw threads specified in JIS B 0208-Unified Fine Screw Threads, mainly used for the purpose of fastening.