ASME B18.8.1

CLEVIS PINS AND COTTER PINS (INCH SERIES)

English 2005
0.000
ASME
Detailed Information

This standard covers the complete dimensional and general data for clevis pins recognized as “American National Standard.”

Download File
(Log in to download spec.)

Check out other specifications

Custom
General Motors | GM6047M
2005
English

Corrosion Protective Coatings Phosphate/Electro-Organic

This specification covers the basic requirements for a black corrosion protective coating which is produced by the use of the bulk electrodeposition process or, if the parts do not lend themsel [...]
ISO
ISO 7091
2000
English

Plain washers – Normal series – Product grade C

This International Standard specifies the characteristics of normal-series, product-grade-C plain washers in the 100 HV hardness class and of nominal sizes (nominal thread diameters) ranging fr [...]
ASME
ASME B18.16.6
2008
English

NYLON INSERT LOCKNUTS (INCH SERIES)

This Standard covers the complete general, dimensional, mechanical, and performance data for carbon steel, inch series nylon insert locknuts of property grades NE2, NE5, and NE8 designated as A [...]
DIN EN
DIN EN 28740
1992
English

Full-length parallel grooved pins, with chamfer (ISO 8740 : 1986) English version of DIN EN 28 740

This International Standard specifies the characteristics of full-length parallel grooved pins with chamfer which have three equally spaced grooves impressed longitudinally on their exterior su [...]
BS EN
BS EN 14399-6
2015
English

High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers

This European Standard specifies, together with EN 1 4399-1 and EN 1 4399-2, hardened and tempered chamfered plain washers with chamfer intended for bolting assemblies with large series hexagon [...]
DIN
DIN 6796
1987
English

Conical spring washers for bolt/nut assemblies

Conical spring washers covered in this standard are deemed to be spring washers designed for use for bolt/nut assemblies involving bolts of property classes 8.8 to 10.9 as specified in ISO 898 [...]
ISO
ISO/R 2101
1971
English

ALUMINIUM AND ALUMINIUM ALLOYS – SHEAR TEST FOR RIVET WIRE AND RIVETS

This ISO Recommendation applies to the shear testing of aluminium and aluminium alloy rivet wire and rivets, having a diameter not greater than 10 mm (3/8 in).
ASTM
ASTM A502
1993
English

Standard Specification for Steel Structural Rivets

1.1 This specification covers three grades of steel rivets in diameters from 1/2 to 1 1/2 in. ( 13 to 38 mm), inclusive, for structural fabricating purposes. The grades are as follows: 1.1.1 Gr [...]
JIS
JIS B 2804
2001
English

Retaining rings

This Japanese Industrial Standard specifies retaining rings, which are generally used on a shaft or in a bore, of the following shapes: a) C-type retaining ring, of which the shape is like a le [...]