ASME B18.8.3M

SPRING PINS – COILED TYPE [METRIC SERIES]

English 1995
0.000
ASME
Detailed Information

Coiled spring pins shall have straight cylindrical sides with both ends chamfered. They are available in standard duty, heavy duty, and light duty to suit various design requirements. Coiled type spring pins have multiple walls, are spirally wrapped from strip stock to a diameter larger than basic, and are heat treated as necessary or cold worked. Upon installation, the pin diameters contract and the spring reaction against the sides of the hole tends to retain the pin. Dimensions of coiled type spring pins are given in Table 1.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0261
2004
English

Parallel screw thread gauges— Measuring method of gauges

This Japanese Industrial Standard specifies measuring method of screw thread plug gauges and ring gauges (hereafter referred to as “thread gauges”) among limit gauges for parallel screw threads having single-start thread with symmetrical ridge defined in JIS B 0251, JIS B 0254 or JIS B 02 […]
JIS
JIS B 1015
2001
English

Hexalobular internal driving feature for bolts and screws

This Standard specifies the shape and basic dimensions of hexalobular internal driving feature for bolts and screws including the gauging method. The curvature of the contour of the hexalobular internal driving feature is defined by the gauges specified in Tables 3, 4 and 5. Additional i […]
DIN
DIN 188
1987
English

T-head bolts with double nib

This standard specifies M 8 to M 80 X 6 T-·head bolts with double nib. They are designed for use in attaching components to foundations or similar structures by means of T-slots, such as are specified in DIN 649, where T-head bolts with square neck are considered adequate detachable fasteners.
ASME
ASME B18.1.1
2001
English

SMALL SOLID RIVETS 7/16 IN. NOMINAL DIAMETER AND SMALLER

This standard covers complete general and dimensional data for those types of small solid rivets recognized as "American National Standard." All other types of small solid rivets, within the limits of the diameters contained herein, are to be considered special. Also included is an append […]
ANSI ASME
ANSI/ASME B18.7.1M
1992
English

METRIC GENERAL PURPOSE SEMI-TUBULAR RIVETS

1.1.1 This standard covers the general and dimensional data for oval head semi-tubular rivets for use in general purpose applications. The products described are suitable for joining metallic and nonmetallic materials or combinations thereof. Although these products are suitable for gener […]
BS EN ISO
BS EN ISO 286-2
2010
English

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

This part of ISO 286 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286-1. This part of ISO 286 covers values for the upper limit deviations ES (for holes) and es (for shafts), and the lower limit devia […]