ASME B18.8.8M

HEADED CLEVIS PINS [METRIC SERIES]

English 1994
0.000
ASME
Detailed Information

This standard covers the complete dimensional and general data for two types, A and B, of metric series headed clevis pins intended for general applications and recognized as American National Standard.

Type A headed clevis pins are without holes.

Type B headed clevis pins specified herein are with holes intended for use with cotter pins. However, a means is provided to
specify other hole sizes when required for use with other types of pins.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 966
1984
English

Cross recessed raised countersunk (oval) head screws

If raised countersunk oval head screws with length tabled below the stepped line are to be supplied threaded up to the head, i.e. deviating from the standard design, the letter A shall be incorporated in the description, in accordance with DIN 962, or the deviating thread length shall be […]
DIN
DIN 71511
1975
English

Gaskets for Oval Flanges

Gaskets according to this Standard are intended for oval flanges according to DIN 71501.
DIN
DIN 6903
1990
English

Plain washers for tapping screw and washer assemblies

Washers as specified in this standard are intended for use with DIN 6901 tapping screw and washer assemblies.
DIN
DIN 6900-1
1990
English

Screw and washer assemblies – Coarse threaded screws with captive plain washer

This standard specifies requirements for screw and washer assemblies consisting of an M 2,5 to M12 screw with flat bearing face, assigned to property class 10.9 or less, and a captive plain washer. Socket or cross recessed head screws the critical cross section of which is not located in […]
DIN
DIN 553
1986
English

Slotted set screws with cone point (modified version of ISO 7434, 1983 edition )

This standard specifies the characteristics of M 1 to M 12 slotted set screws with cone point, assigned to product grade A. Where, for special purposes, the screws are to meet requirements differing from those specified in the present standard, e.g. in respect of material (hardness class) […]
IFI
IFI-119
2008
English

STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of inch series structural flush break pull mandrel self-plugging blind rivets suitable for use in joining the component parts of an assembly. A metric series counterpart standard is in existence under desi […]