ASME Draft B18.2.7.1M

METRIC 12-SPLlNE FLANGE SCREWS

English 1999
0.000
ASME
Detailed Information

1.1 This standard covers the complete general and dimensional data for metric 12-spline flange screws recognized as American National Standard.
1.2 The inclusion of dimensional data in this standard is not intended to imply that all of the sizes in conjunction with the various options described herein are stock items. Consumers should consult with suppliers concerning lists of stock production 12-spline flange screws.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6792
1993
English

Semitubular countersunk head rivets with nominal diameters from 1,6 to 10 mm

This standard specifies dimensions of steel and nonferrous metal semitubular countersunk head rivets with nominal diameters from 1,6 to 10 mm.
DIN
DIN 13-13
1983
English

ISO metric screw threads Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes

This standard applies to ISO metric screw threads having the basic profile as defined in DIN 13 Part 19. The limits for the bolt root radius are expressed by R = 0,144 p = H/6 for the maximum d [...]
DIN
DIN 562
2000
English

Square thin nuts Product grade B

This standard specifies dimensions and technical delivery conditions for sizes M1,6 to M10 square thin nuts of product grade B.
DIN
DIN 6798
1988
English

Serrated lock washers

The main purpose of serrated lock washers is to permit the flow of electric current between components coated by varnish, anti-corrosive agents or similar materials, the bent ends of the washer [...]
DIN
DIN 962
1990
English

Designation system for fasteners

This standard specifies a system of designation for bolts, screws, studs and nuts (‘fasteners’, for short), and also gives supplementary order designations for special features and finishes of [...]
IFI
IFI-110
2008
English

GLOSSARY OF TERMS RELATING TO BLIND RIVETS

This glossary presents preferred nomenclature and definitions of terms relating to blind rivets. It is intended that this glossary serve as a guide to users and producers to assist them toward [...]
DIN
DIN 8188
1984
English

American type roller chains

This standard specifies dimensions and technical delivery conditions for American type roller chains which, together with their associated chain wheels, are predominantly used as power transmis [...]
ASME
ASME B18.31.3
2009
English

THREADED RODS (INCH SERIES)

This Standard covers the complete general and dimensional data for inch series threaded rods recognized as American National Standard. Included are diameters #4 through 4 in. UNC, UNF, 8UN, and [...]
DIN
DIN 927
1986
English

Slotted shoulder screws

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]