ASME Draft Revision B18.6.5M

METRIC THREAD FORMING AND THREAD CUTTING TAPPING SCREWS

English 1998
0.000
ASME
Detailed Information

This standard covers the complete general, dimensional and performance requirements for the various types of slotted and recessed head metric tapping screws recognized as standard. Also included are Appendices which provide specifications and instructions for protrusion gaging of flat countersunk head screws, page G-69, across corners gaging of hex head screws, page G-70, penetration and wobble gaging of recessed head screws, pages G-71 and 76.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM A325M
1997
English

Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]

1.1.1 Type 1-Bolts made of medium-carbon steel. 1.1.2 Type 2-Bolts made from what is generally described as low-carbon martensite steel. 1.1.3 Type 3-Bolts made of steel having atmospheric corrosion resistance and weathering characteristics comparable to that of the steel covered in Speci […]
DIN
DIN 7971
1970
English

Pan Head Tapping Screws with Slot

Bracketed nominal diameters should be avoided wherever possible. Normally these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data.
DIN
DIN 961
1970
German

Sechskantschrauben- Gewinde annähernd bis Kopf – Metrisches Feingewinde – Ausführung m und mg

Üblicherweise werden diese Schrauben in den durch Gewichtsangabe gekennzeichneten Größen hergestellt. Technische Lieferbedingungen nach DIN 267
ASTM
ASTM A490M
1993
English

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inch. These bolts are intended for use in structural joints that are comparable to those made under the Specification for Structural Joints […]
ISO
ISO 14580
2001
English

Hexalobular socket cheese head screws

This International Standard specifies the characteristics of hexalobular socket cheese head screws in product grades A and with thread sizes from M2 up to and including M10.
NASM
NASM 35206
2004
English

SCREW, MACHINE-PAN HEAD, CROSS-RECESSED, CARBON STEEL, CADMIUM PLATED, UNC-2A

THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/2. ACCEPTABILITY OF SCREW THREADS SHALL BE IN ACCORDANCE WITH FED-STD-H28/20, SYSTEM 21.