ASTM A368

Standard Specification for Stainless Steel Wire Strand

English 2009
0.000
ASTM
Detailed Information

1.1 This specification covers stainless steel wire strand composed of a multiplicity of round wires and suitable for use as guy wires, overhead ground wires, and similar purposes.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7967
1970
English

Self Locking Counter Nuts

When the self locking counter nuts have electrolytically deposited surface protection it is essential that suitable treatment methods should be adopted in order to prevent hydrogen embrittlement.
DIN EN
DIN EN 28676
1992
English

Hexagon head screws with metric fine pitch thread – Product grades A and B – (ISO 8676: 1988) – English version of DIN EN 28 676

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread d […]
DIN
DIN 1158
1973
English

Wall hooks

Wall hooks shall be made of steel (grade at manufacturer's discretion) and have a bright finish (bk).
DIN EN
DIN EN 28673
1992
English

Hexagon nuts, style 1, with metric fine pitch thread – Product grades A and B (ISO 8673 : 1988) English version of DIN EN 28 673

This International Standard gives specifications for hexagon nuts, style 1, with metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 64 mm, with product g […]
JIS
JIS B 1124
2003
English

Drilling screws with tapping screw thread

This Standard is the Japanese Industrial Standard prepared based on first editions of ISO 15480 Hexagon washer head drilling screws with tapping screw thread, ISO 15481 Cross recessed pan h […]
DIN
DIN 985
1987
English

Prevailing torque type hexagon thin nuts with nonmetallic insert

This standard specifies requirements for M 3 to M 48 prevailing torque type hexagon nuts with nonmetallic insert, assigned to product grade A for sizes up to M 16 and product grade B for si […]
JIS
JIS B 1117
1995
English

Slotted set screws

This Japanese Industrial Standard specifies the steel made slotted set screws (hereafter, referred to as "steel set screws"), and stainless steel made set screws (hereafter, referred to as […]
DIN
DIN 926
1986
English

Slotted set screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in […]
JIS
JIS B 1107
2004
English

Hexalobular socket head screws

This Standard specifies the characteristics of hexalobular socket head screws in product grades A and with nominal thread sizes from M2 up to and including M10. If other specifications tha […]