ASTM A489

Standard Specification for Carbon Steel Lifting Eyes

English 1993
0.000
ASTM
Detailed Information

1.1 This specification covers weldless forged, quenched, and tempered carbon steel threaded lifting eyes (fomerly eyebolts) for overhead lifting.
1.2 The specification includes two types denoting shank pattern and one style denoting shank length (both defined in
ANSI/ASME B 18.15) as follows:
1.2.1 Type 1- Plain pattern (straight shank).
1.2.2 Type 2-Shoulder pattern.
1.2.3 Style B-Short length.
1.3 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are for
information only.

Download File
(Log in to download spec.)

Check out other specifications

ASME ANSI
Abstract of ASME/ANSI B1.12
1998
English

CLASS 5 INTERFERENCE-FIT THREAD

This standard provides dimensional tables for external and internal plastic flow interference-fit (Class 5) threads of modified National thread form in the coarse thread series (NC) in size […]
DIN
DIN 7985
1972
English

Recessed Raised Cheese (Fillister) Head Screws

Normally, these screws are manufactured in the sizes for which weight details are given. If the screws are to be supplied with captive washer components, the designation must be augmented a […]
JIS
JIS B 0205-2
2001
English

ISO general purpose metric screw threads — Part 2: General plan

This Standard specifies ISO general purpose metric screw threads (M) having basic profile according to JIS B 0205-1. Basic dimensions are given in JIS B 0205- 4. For tolerances see JIS B 0209-1.
DIN
DIN 675
1993
English

Flat countersunk head rivets with nominal diameters from 3 to 5 mm

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal flat countersunk head rivets with nominal diameters from 3 to 5 mm.
DIN
DIN 909
1992
English

Hexagon head pipe plugs

This standard specifies dimensions and technical delivery conditions for pipe plugs which are intended to be screwed Into holes with parallel thread as specified in DIN 13 Part 12, DIN 158, […]
DIN
DIN 6923
1983
English

Hexagon nuts with flange

This standard gives specifications for hexagon nuts with flange, with metric coarse or fine thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts ar […]
ISO
ISO 7051
1983
English

Cross recessed raised countersunk (oval) head tapping screws

This International Standard specifies the characteristics of cross recessed raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.
SAE
SAE J81
1997
English

THREAD ROLLING TAPPING SCREWS

This standard covers requirements for thread rolling screws suitable for use in general engineering applications. (It is intended that "thread rolling" screws have performance capabilities […]
DIN
DIN 910
1992
English

Heavy-duty hexagon head screw plugs

This standard specifies dimensions and technical delivery conditions for screw plugs which are intended to be screwed into holes with parallel thread as specified in DIN 13 Part 5, 6 or 7, […]