ASTM A574M

Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]

English 1998
0.000
ASTM
Detailed Information

1.1 This specification covers the requirements for quenched and tempered alloy steel socket-head cap screws 1.6 mm
through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.

Download File
(Log in to download spec.)

Check out other specifications

NF
NF E 25-511
1984
French

RONDELLES CONIQUES STRIÉES DE SERRAGE Symbole CS

La présente norme fixe les caractéristiques des rondelles coniques striées de serrage en acier au carbone, et définit les essais à effectuer pour leur contrôle. Elles sont généralement ut […]
ISO
ISO 7416
1984
English

Plain washers, chamfered, hardened and tempered for high-strength structural bolting

This International Standard specifies those hardened and tempered circular washers intended for assembIy with large series hexagon high-strength Structural bolts and nuts of diameters from […]
DIN
DIN 1544
1975
English

Plat Steel Products – Cold Rolled Steel Strip – Dimensions, Permissible Variations on Dimensions and Form

1.1. This Standard applies to cold rolled flat products ≥ 0.10 ≤ 6 mm thick without surface coatings, and in particular to cold rolled strip in rolling widths ≤ 650 mm and bars cut from suc […]
DIN
DIN 6900-2
1990
English

Screw and washer assemblies – Coarse threaded screws with captive wave spring washer

This standard specifies requirements for screw and washer assemblies consisting of an M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive wave sp […]
ISO
ISO 7380-2
2011
English

Button head screws — Part 2: Hexagon socket button head screws with collar

This International Standard specifies the characteristics of hexagon socket button head screws with collar with threads from M3 up to and including M16, with product grade A and with reduce […]
ASTM
ASTM F837
2008
English

Standard Specification for Stainless Steel Socket Head Cap Screws

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch socket head cap screw (SHCS) with nominal thread 0.060 through 1.500 in. and intended for use […]
ASTM
ASTM F836M
1997
English

Standard Specification for Style 1 Stainless Steel Metric Nuts

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric nuts with nominal thread diameters M1.6 through M36, and intended for use in engineering ap […]
ISO
ISO 225
1983
English, French, Russian

Fasteners – Bolts, screws, studs and nuts – Symbols and designations of dimensions

This International Standard lays down the method of dimensioning bolts, screws, studs and nuts, recommended for use unless otherwise specified in the appropriate product Standards. It incl […]
ASTM
ASTM F837M
1991
English

Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M 1.6 through M 36 and intended for use i […]