ASTM F1077

Standard Guide for Selection of Committee F-16 Fastener Specifications

English 1995
0.000
ASTM
Detailed Information

1.1 This guide is intended to provide a rapid, easy to use method for identifying Committee F-16 fastener specifications and their applicable marking requirements.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 3800-1
1977
English

Threaded fasteners – Axial load fatigue testing – Part 1 : Test methods

This International Standard specifies the conditions for carrying out axial load fatigue tests on threaded fasteners.
DIN
DIN 7992
1970
English

T-head Bolts with Large Head

Technical conditions of delivery according to DIN 267
ASME
ASME B18.10
2006
English

TRACK BOLTS AND NUTS

This Standard covers the complete general and dimensional data for inch series oval neck and elliptic neck track bolts and square nuts intended for use with these bolts, and recognized as an Am [...]
ASTM
ASTM A449
1993
English

Standard Specification for Quenched and Tempered Steel Bolts and Studs

1.1 This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required. 1.2 [...]
ASTM
ASTM F880
2008
English

STAINLESS STEEL SOCKET-SET SCREWS

1.1 This specification covers the requirements for austenitic grade stainless steel socket-set screws (SSS) sizes 0.060 through 0.500 in., in two conditions, AF and CW. 1.2 Units一The values s [...]
DIN
DIN 434
2000
English

Square taper steel washers for use with channel sections

This standard specifies dimensions and technical delivery conditions for square taper washers for use in structural bolting of steel channel sections using bolts up to property class 5.6.
ASTM
ASTM A490M
1993
English

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inch. These bolts are intended for use in st [...]
DIN EN
DIN EN 22341
1992
English

Clevis pins with head (ISO 2341 : 1986) English version of DIN EN 22 341

This International Standard specifies the characteristics of clevis pins with head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
ASTM
Abstract of ASTM A490
2002
English

STRUCTURAL BOLTS, ALLOY STEEL, HEAT TREATED, 150 KSI MINIMUM TENSILE STRENGTH

1.1 This specification covers two types of quenched and tempered, alloy steel, heavy hex structural bolts having a tensile strength of 150 to 173 ksi. 1.2 These bolts are intended for use in st [...]