ASTM F468

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE

English 2010
0.000
ASTM
Detailed Information

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications.
1.2 Applicable nuts for use with bolts, cap screws, and studs covered by this specification are covered by Specification F467.

NOTE 1-A complete metric companion to Specification F468 has been developed-F468M; therefore no metric equivalents are presented in this specification.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7991
1986
English

Hexagon socket countersunk head cap screws

This standard specifies product grade A hexagon socket countersunk head cap screws with ISO metric screw thread from size M 3 up to and including size M 24. If, in special cases, the screws ar [...]
MIL
MIL-DTL-16232G
2000
English

PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE

This specification covers two types of heavy phosphate coating for ferrous metals, applied by immersion. The coatings consist of a manganese phosphate or zinc phosphate base and, when specified [...]
DIN
DIN 302
1993
English

Steel countersunk head rivets with nominal diameters from 10 to 36 mm

This standard specifies dimensions of steel countersunk head rivets with nominal diameters from 10 to 36 mm.
ASTM
Abstract of ASTM F468
2001
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys i [...]
ASME
ASME B18.2.1
1996
English

SQUARE AND HEX BOLTS AND SCREWS (INCH SERIES)

This standard covers the complete general and dimensional data for eight product types of inch series square and hex bolts and screws recognized as American National Standard. Also included are [...]
DIN EN
DIN EN 28750
1992
English

Coiled, standard duty spring-type straight pins (ISO 8750 : 1987) English version of DIN EN 28 750

This International Standard specifies the characteristics of standard duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 0,8 to 20 mm inclusive.
JIS
JIS B 0209-1
2001
English

ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data

This Standard specifies the tolerance system for ISO general purpose metric screw threads (M) conforming to JIS B 0205-2. The tolerance system refers to the basic profile in accordance with JI [...]
DIN
DIN 7604
1992
English

Light-duty hexagon head screw plugs

This standard specifies dimensions and technical delivery conditions for screw plugs which are Intended to be screwed Into holes with parallel thread as specified in DIN 13 Part 5 and 6. Such p [...]
ASME
ABSTRACT OF ASME B1.3
2007
English

SCREW THREAD GAGING SYSTEMS FOR ACCEPTABILITY: INCH AND METRIC SCREW THREADS (UN, UNR, UNJ, M, AND MJ)

(a) This Standard presents screw thread gaging systems suitable for determining the acceptability of inch UN, UNR, and UNJ screw threads on externally and internally threaded products. It estab [...]