ASTM F606M

STANDARD TEST METHODS FOR DETERMINING THE MECHANICAL PROPERTIES OF EXTERNALLY AND INTERNALLY THREADED FASTENERS, WASHERS, AND RIVETS [METRIC]

English 1995
0.000
ASTM
Detailed Information

1.1 These test methods establish procedures for conducting tests to determine the mechanical properties of metric externally and internally threaded fasteners, washers, and rivets.
1.2 Property requirements and the applicable tests for their determination are specified in individual product standards. In those instances where the testing requirements are unique or at variance with these standard procedures, the product shall specify the controlling testing requirements.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7094
1983
English

Plain washers – Extra large series – Product grade C

This International Standard lays down the specification for plain washers of product grade C with large outside diameter, preferable for bolts, screws and nuts in wood constructions, with thread sizes from M 5 to M 36 inclusive.
DIN EN
DIN EN 28745
1992
English

Half-length taper grooved pins (ISO 8745 : 1986) English version of DIN EN 28 745

This International Standard specifies the characteristics of half-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,5 to 25 mm inclusive. The displaced material to […]
DIN
DIN 1804
1971
English

Slotted Round Nut for Hook Spanner – ISO Metric Fine Thread

Material (strength properties): at least 5 according to DIN 267 Sheet 4 Type: w unhardened and unground h hardened to HRC 60 ± 2 with the exception of the thread, faces ground For hook wrenches, see DIN 1810
DIN EN
DIN EN 28752
1993
English

Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752

This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.
ISO
ISO 1502
1978
English

ISO general purpose metric screw threads – Gauging

This International Standard gives the necessary instructions for the manufacture and use of gauges for checking ISO general purpose metric screw threads complying with ISO 68 and ISO 261. It is recognized that other methods of checking may be used, for example measurement with indicating […]
DIN
DIN 933
1987
English

M 1,6 to M 52 hexagon head screws threaded up to the head – Product grades A and B

This standard specifies requirements for M1,6 to M52 hexagon head screws threaded up to the head, assigned to product grade A, for sizes up to M24 and length not exceeding 10d or 150mm, and to product grade B for sizes greater than M24 or length exceeding 10d or 150mm.