ASTM F880M

Standard Specification for Stainless Steel Socket Set Screws [Metric]

English 1997
0.000
ASTM
Detailed Information

1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SS5), sizes M 1.6
through M 24, having Property Classes A 1-50 and A 1-70.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 263
1973
English

ISO inch screw threads – General plan and selection for screws, bolts and nuts – Diameter range 0.06 to 6 in

This International Standard tabulates ISO inch screw threads {except for pipe threads) having the basic profile for triangular screw threads specified in ISO 68, ISO general purpose screw threa [...]
DIN
DIN 963
1970
English

Slotted Countersunk (Flat) Head Screws (Countersunk Heads according to ISO)

Intermediate length should as for as possible be avoided. Lengths over 100 mm should be arranged in 10 mm steps. Normally these screws are manufactured in the sizes characterized by the quoted [...]
ASTM
Abstract of ASTM F468M
1993
English

NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE [METRIC]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of a [...]
DIN
DIN 93
1974
English

Tab Washers with Long Tab

Technical conditions of delivery according to DIN 522
DIN
DIN 478
1985
English

Square head bolts with collar

This standard specifies product grade A square head bolts with collar and M 5 to M 24 coarse thread. Where, for special purposes, the bolts are to meet requirements differing from those specifi [...]
DIN
DIN 562
1987
English

Square thin nuts Product grade B

This standard specifies requirements for M1,6 to M10 square thin nuts assigned to product grade B. If, in special cases, nuts are to comply with specifications other than those given in this st [...]