BS EN 10025-1

Hot rolled products of structural steels — Part 1: General technical delivery conditions

English 2004
0.000
BS EN
Detailed Information

1.1 This document specifies requirements for flat and long products (see Clause 3) of hot rolled structural steels excluding structural hollow sections and tubes. Part 1 of this document specifies the general delivery conditions.
The specific requirements for structural steels are given in the following Parts:
Part 2: Technical delivery conditions for non-alloy structural steels
Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

The steels specified in this document are intended for use in welded, bolted and riveted structures.
1.2 This document does not apply to coated products or to steel products for general structural applications in accordance with the standards and draft standards listed in the Bibliography.

Download File
(Log in to download spec.)

Check out other specifications

Others
BS 3643-1
1981
English

Specification for ISO metric screw threads — Part 1: Principles and basic data

This Part of this British Standard specifies the principles and basic data for single-start, parallel screw threads having the ISO basic profile for triangular screw threads. Data for 1,0 mm to [...]
3.01
DIN
DIN 6378
1974
English

Clip Bolts

Clip bolts according to DIN 6378 are clamping components which are used in the manufacture of workpieces. They form part of fixtures which are in immediate contact with workpieces for machining [...]
DIN
DIN 934
1987
English

Hexagon nuts with metric coarse and fine pitch thread – Product classes A and B

This standard specifies requirements for M1 to M160 hexagon nuts, assigned to product grade A (up to size M16) or product grade B (for sizes above M16). lf, in special cases, nuts are to comply [...]
DIN
DIN 6332
1993
English

Grub screws with thrust point

This standard specifies requirements for grub screws with a thrust point which, together with controlling elements, wing nuts or knurled nuts, are suitable for clamping with the thrust point di [...]
ASTM
ASTM A368
2009
English

Standard Specification for Stainless Steel Wire Strand

1.1 This specification covers stainless steel wire strand composed of a multiplicity of round wires and suitable for use as guy wires, overhead ground wires, and similar purposes. 1.2 The value [...]
DIN
DIN 6880
1975
English

Bright steel for key bars – Dimensions, limit deviations, mass

This Standard applies to bright key steel in bars of square, rectangular or flat-rectangular cross-section in the nominal dimensions indicated in Tables 1 and 2 and in the steel specified in Se [...]
ISO
ISO 8765
1988
English

Hexagon head bolts with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diame [...]
ASTM
Abstract of ASTM A394
2000
English

STEEL TRANSMISSION TOWER BOLTS, ZINC COATED AND BARE

1.1 This specification covers the chemical and mechanical requirements of hexagon and square-head zinc coated steel bolts and atmospheric corrosion resistant bolts , in nominal thread diameters [...]
DIN
DIN 977
1998
English

Hexagon weld nuts with flange

This standard specifies requirements for hexagon weld nuts with flange, with size M5 to M16 metric threads (coarse) or 12 mm to 16 mm diameter threads (fine), of product grade A. Weld nuts conf [...]