BS EN 10025-6

Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

English 2009
0.000
BS EN
Detailed Information

Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) and are supplied in the quenched and tempered condition as given in 6.3.

The steels specified in this document are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness ≤ 150 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness ≤ 100 mm for grade S890 and a maximum nominal thickness ≤ 50 mm for grade S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa to 960 MPa.

Download File
(Log in to download spec.)

Check out other specifications

ASME ANSI
ASME/ANSI B18.3.1M
1993
English

METRIC SOCKET HEAD CAP SCREWS

1.1.1 This standard contains complete general and dimensional data for metric series hexagon socket head cap screws in sizes from 1.6 mm to 48 mm and for metric series spline socket head ca […]
DIN
DIN 555
1972
English

Hexagon Nuts Metric Thread Type g

Tho dimensions of the hexagon nuts according to this Standard correspond with those indicated in the ISO Recommendation ISO/R 272-1968 published by the International Organization for Standa […]
ASTM
Abstract of ASTM F1136
1993
English

CHROMIUM/ZINC CORROSION PROTECTIVE COATINGS FOR FASTENERS

1.1 This specification covers the basic requirements for three grades of chromium/zinc inorganic coatings for threaded fasteners. 1.2 These coatings are applied by conventional dip-spin or […]
ASTM
Abstract of ASTM A449
2000
English

QUENCHED AND TEMPERED STEEL BOLTS AND STUDS

This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required.
ASTM
Abstract of ASTM F436M
1993
English

HARDENED STEEL WASHERS [METRIC]

1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M10 […]
DIN
DIN 188
1987
English

T-head bolts with double nib

This standard specifies M 8 to M 80 X 6 T-·head bolts with double nib. They are designed for use in attaching components to foundations or similar structures by means of T-slots, such as ar […]
ISO
ISO 14584
2001
English

Hexalobular socket raised countersunk head screws

This International Standard specifies the characteristics of hexalobular socket raised countersunk head screws in product grades A and with thread sizes from M2 to M10 inclusive.
DIN EN
DIN EN 22340
1992
English

Clevis pins without head (ISO 2340 : 1986) English version of DIN EN 22 340

This International Standard specifies the characteristics of clevis pins without head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
DIN
DIN 6798
1988
English

Serrated lock washers

The main purpose of serrated lock washers is to permit the flow of electric current between components coated by varnish, anti-corrosive agents or similar materials, the bent ends of the wa […]