DIN 101

Rivets – Technical delivery conditions

English 1993
0.000
DIN
Detailed Information

This standard specifies technical delivery conditions, test methods and acceptance conditions for all types of standardized
rivets (except for blind rivets). These specifications are generally applicable but may deviate from the specifications of
other relevant product standards, In which case the latter shall take precedence.

Subject to agreement, the specifications of this standard may also be used for non-standardized rivets.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0002-2
1998
English

Technical drawings — Screw threads and threaded parts — Part 2 : Screw thread inserts

This part of JIS B 0002 specifies methods for the representation of screw thread inserts on technical drawings.
DIN EN
DIN EN 10025
1994
English

Hot rolled unalloyed structural steel products – Technical delivery conditions (includes Amendment A 1 : 1993) English version of DIN EN 10025

1.1 This European Standard specifies requirements for long products and flat products of hot rolled non-alloy, base and quality steels in the grades and qualities given in tables 2 and 3 (chemi [...]
ISO
ISO 2903
1977
English

ISO metric trapezoidal screw threads – Tolerances

This International Standard specifies a tolerance system for metric trapezoidal screw threads according to ISO 2902. The tolerances refer to the basic profile according to ISO 2901. The tolera [...]
DIN
DIN 101
1993
English

Rivets – Technical delivery conditions

This standard specifies technical delivery conditions, test methods and acceptance conditions for all types of standardized rivets (except for blind rivets). These specifications are generally [...]
BS EN
BS EN 14399-2
2015
English

High-strength structural bolting assemblies for preloading Part 2: Suitability for preloading

This European Standard specifies the technical requirements for high-strength structural bolting assemblies in order to ensure the suitability for preloading of bolted connections in metallic s [...]
ISO
ISO/R 1051
1969
English

RIVET SHANK DIAMETERS (DIAMETER RANGE 1 TO 36 mm)

This ISO Recommendation tabulates diameters for the shanks of metal rivets for general use.
ASME ANSI
ASME/ANSI B18.3.2M
1990
English

METRIC HEXAGON KEYS AND BITS

1.1.1 This standard contains the complete dimensional, mechanical and performance requirements for metric series hexagon keys and bits of nominal sizes from 0.7 mm to 36 mm recognized as "Ameri [...]
DIN
DIN 6887
1968
English

Stressed-type Fastenings with Taper Action – Taper Keys with Gib Head – Keyways – Dimensions and Application

So far no permissible variations have been laid down for the taper on the key and in the keyway. If special conditions make necessary the observance of certain permissible variations these must [...]
JIS
JIS B 1086
1998
English

Widening test on nuts

This Standard specifies the test procedure for evaluating the acceptability of surface discontinuities designated in JIS B 1042 excluding nuts made of free cutting steel. It applies to nuts wi [...]