DIN 1143-1

Round plain head nails for use in automatic nailing machines

English 1982
0.000
DIN
Detailed Information

This standard specifies requirements for round plain head nails for use in automatic nailing machines.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6303
1986
English

Knurled nuts

The following amendments have been made in comparison with the January 1971 edition a) The content of the standard has been editorially revised and aligned with the basic standards concerned b) [...]
DIN
DIN 555
1972
English

Hexagon Nuts Metric Thread Type g

Tho dimensions of the hexagon nuts according to this Standard correspond with those indicated in the ISO Recommendation ISO/R 272-1968 published by the International Organization for Standardiz [...]
EN
EN 10088-3
1995
English

Stainless steels – Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes

1.1 This part of EN 10088 specifies the technical delivery conditions for semi-finished products, hot or cold formed bars, rods and sections of standard grades and special grades of stainless s [...]
DIN
DIN 427
1986
English

Slotted headless screws with chamfered end

This standard specifies the characteristics of M 1 to M 20 slotted headless screws with chamfered end. Where, for special applications, the screws are to meet requirements differing from those [...]
DIN
DIN 653
1986
English

Knurled thin thumb screws

Where knurled thumb screws of sizes not less than M 2 shall be supplied threaded up to the head, letter A as specified in DIN 962 shall be stated in the designation (see example of designation [...]
ASME ANSI
ASME/ANSI B18.3.5M
1993
English

METRIC HEXAGON SOCKET FLAT COUNTERSUNK HEAD CAP SCREWS

1.1.1 This standard contains complete general and dimensional requirements for metric series hexagon socket flat countersunk head cap screws of nominal sizes from 3 mm to 20 mm recognized as Am [...]
DIN
DIN 551
1986
English

Slotted set screws with flat point (modified version of ISO 4766, 1983 edition)

This standard specifies the characteristics of M 1 to M 12 slotted set screws with flat point , assigned to product grade A. Where, for special applications, the screws are to meet requirements [...]
ASTM
ASTM C954
2010
English

STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO STEEL STUDS FROM 0.033 IN. (0.84 mm) TO 0.112 IN. (2.84 mm) IN THICKNESS

1.1 This specification covers minimum requirements for steel drill screws for use in fastening gypsum panel products or metal plaster bases to steel members from 0.033 in. (0.84 mm) to 0.112 in [...]
DIN
DIN 94
1983
English

Split pins

In its October 1972 edition, DIN 94 was aligned with International Recommendation ISO/R 1234 - 1971. This Recommendation was converted into an International Standard in 1976, without any techni [...]