DIN 1152

Round lost head wire nails

English 1973
0.000
DIN
Detailed Information

Wire nails shall be made of steel (grade at manufacturer’s discretion) and have a bright (bk) or galvanized (zn) finish.

Download File
(Log in to download spec.)

Check out other specifications

IFI
IFI-528
1999
English

METRIC STUDS AND BENT BOLTS

1. Scope. This standard covers double end studs of four types and in nominal thread diameters M5 thru M100. 2. Types. Type 1 - Unfinished Type 2 - Finished, Full or Undersize Body Type 3 - Finished, Full Body Type 4 - Finished, Close Body
JIS
JIS B 1052
1998
English

Mechanical properties of steel nuts

This Japanese Industrial Standard specifies mechanical properties of steel nuts.
ASTM
ASTM F568M
1996
English

Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners

1.1 This specification covers chemical and mechanical requirements for nine property classes of carbon and alloy steel externally threaded metric fasteners in nominal thread diameters M1.6 through M100 suited for use in general engineering applications. 1.2 This specification does not cov […]
IFI
IFI-509
1999
English

METRIC BREAK MANDREL CLOSED END BLIND RIVETS

This standard establishes the dimensional, mechanical, and performance requirements of metric break mandrel closed end blind rivets suitable for use in joining the component parts of an assembly.
ASTM
ASTM F1941/F1941M
2015
English

Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric

1.1 This specification covers application, performance and dimensional requirements for electrodeposited coatings on threaded fasteners with unified inch and metric screw threads, but it may also be applied to other threaded parts and non-threaded parts such as washers and pins. It specif […]
5.01
Custom
General Motors | GM4298P
1997
English

SALT SPRAY TEST

This standard covers the requirements necessary to attain the conditions found in a neutral salt spray test cabinet. 1.1 The chamber operation is based on ASTM B117 with the following clarifications. 1.2 The salt spray test is better suited for quality control and process control evaluati […]