DIN 1157

Decorator’s tacks

English 1973
0.000
DIN
Detailed Information

Decorator’s tacks shall be made of steel (grade at manufacturer’s discretion) and have a bright (bk) or blue annealed (bl g) finish.

Download File
(Log in to download spec.)

Check out other specifications

NASM
NASM 21266
1999
English

GROMMET, PLASTIC, EDGING

MATERIAL: NYLON PER SPECIFICATION ASTM D4066, TYPE 1. POLYTETRAFLUOROETHYLENE (TFE) PER SPECIFICATION ASTM D1457. POLYFLUOROETHYLENEPROPYLENE (FEP) PER SPECIFICATION ASTM D2116.
DIN
DIN 7168
1991
English

General tolerances for linear and angular dimensions and geometrical tolerances (not to be used tor new designs)

This standard is intended to ensure that all drawings prepared to date In which general tolerances have been specified on the basis of DIN 7168 will remain intelligible and be interpreted corre [...]
DIN
DIN 601
1970
English

Hexagon Bolts without Hexagon Nut – with Hexagon Nut – Type g

This standard agrees essentially with the following ISO Recommendations issued by the International Organization for Standardization (ISO): ISO/R 272-1968 ISO/R 733-7968 ISO/R 855-1968 ISO/R 888-1968
DIN EN
DIN EN 24032
1992
English

Hexagon nuts, style 1 – Product grades A and B (ISO 4032 :1986) English version of DIN EN 24032

This International Standard gives specifications for hexagon nuts, style 1, with thread diameters from M1,6 to M64 inclusive, with product grade A for sizes d < M16 and product grade B for size [...]
DIN
DIN 97
1986
English

Slotted countersunk (flat) head wood screws

The following amendments have been made in comparison with the March 1975 edition. a) Nominal lengths 90 mm and 100 mm have been deleted in order to bring this standard into line with the other [...]
BS EN ISO
BS EN ISO 15330
1999
English

Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method

This International Standard specifies a preloading test which is able to detect the occurrence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to — metric b [...]
ISO
ISO 7093
1983
English

Plain washers – Large series – Product grades A and C

This International Standard lays down the specification for plain washers of product grades A and C with outside diameter three times nominal size (nominal thread diameter), preferable for hexa [...]
ASTM
Abstract of ASTM F788/F788M
2008
English

SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS

This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of bolt, screws, and studs, including heat- [...]
ISO
ISO 14580
2001
English

Hexalobular socket cheese head screws

This International Standard specifies the characteristics of hexalobular socket cheese head screws in product grades A and with thread sizes from M2 up to and including M10.