DIN 125-1

Product grade A washers with a hardness up to 250 HV designed for use with hexagon head bolts and nuts

English 1990
0.000
DIN
Detailed Information

This standard specifies requirements for product grade A washers with a hardness up to 250 HV, designed for use with bolts of properly class 8.8 or less. The preferred application of these washers is in product grades A and B hexagon head bolt/hexagon nut assemblies, with widths acoss flats as specified in ISO 272.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 267-10
1988
English

Fasteners – Technical delivery conditions – Hot-dip galvanized parts

Th s standard specifies the technical delivery conditions for fasteners (mainly screws. bolts and nuts) with an M 6 to M 36 coarse thread and provided with a zinc coating applied by hot-dip […]
DIN
DIN 6915
1989
English

High-strength hexagon nuts with large widths across flats for structural steel bolting

Hexagon nuts as specified in this standard are intended for use in GV and SL structural steel bolting in accordance with DIN 18 800 Part 1, together with DIN 6914 bolts.
DIN EN
DIN EN 28748
1992
English

Coiled, heavy duty spring-type straight pins (ISO 8748 : 1987) English version of DIN EN 28 748

This International Standard specifies the characteristics of heavy duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 1,5 to 20 mm inclusive.
DIN
DIN 50021
1988
English

Salt spray testing

This standard specifies the requirements which corrosion testing apparatuses and corrosive agents must meet in salt spray testing, the aim being to enable identical conditions to be reprodu […]
DIN
DIN 671
1981
English

Bright round steel – Dimensions Permissible deviations – according to ISO tolerance zone h9

This standard applies to bright round steel of nominal diameters from 1 to 150 mm, made of the steels listed in clause 5. Details as to finish and lengths to be delivered are given in clause 6.
DIN
DIN 1816
1971
English

Round Nut with Set Pin Holes Inside – ISO Metric Fine Thread

Material (strength properties): at least 5 according to DIN 267 Part 4
ASTM
ASTM F568M
1996
English

Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners

1.1 This specification covers chemical and mechanical requirements for nine property classes of carbon and alloy steel externally threaded metric fasteners in nominal thread diameters M1.6 […]
JIS
JIS B 0208
1978
English

Unified fine screw threads

This Japanese Industrial Standard specifies the basic profile, formulas and basic dimensions for unified fine screw threads used for aircrafts and other purposes of limited necessity.
DIN
DIN 967
1994
English

Product grade A cross recessed pan head screws with collar

This standard specifies requirements for M 3 to M 8 cross recessed pan head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special screw types or […]