DIN 125-2

Product grade A washers with a hardness from 300 HV designed for use with hexagon head bolts and nuts

English 1990
0.000
DIN
Detailed Information

This standard specifies requirements for product grade A washers with a hardness of 300 HV or more. The preferred application of these washers is in product grades A and B hexagon head bolt/hexagon nut assemblies, with widths across flats as specified in ISO 272.

Download File
(Log in to download spec.)

Check out other specifications

BS EN ISO
BS EN ISO 8752
2009
English

Spring-type straight pins — Slotted, heavy duty

This International Standard specifies the characteristics of slotted spring-type straight pins, made of steel or of austenitic or martensitic stainless steel, heavy duty, with nominal diameter, [...]
DIN
DIN 603
1981
English

Mushroom head square neck bolts

This standard specifies mushroom head square neck bolts with metric threads M 5 to M 20 of product grade C.
ISO
ISO/R 1501
1970
English

ISO MINIATURE SCREW THREADS

This ISO Recommendation specifies ISO miniature screw threads with thread sizes from 0.3 to 1.4 mm diameter. For technological and functional reasons the tolerancing system for these threads d [...]
ISO
ISO 8015
2011
English

Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules

This International Standard specifies fundamental concepts, principles and rules valid for the creation, interpretation and application of all other International Standards, Technical Specifica [...]
DIN
DIN 7990
1989
English

Hexagon head bolts for structural steel bolting for supply with nut

This standard specifies requirements for M12 to M30 hexagon head bolts for supply with hexagon nut, assigned to product grade C, for use in structural steel bolting. These bolts shall always be [...]
JIS
JIS B 1122
1996
English

Cross recessed head tapping screws

This Japanese Industrial Standard specifies the steel cross recessed head tapping screws (hereafter, referred to as “steel tapping screws”) for general use.
IFI
IFI-123
2008
English

DRIVE PIN BLIND RIVETS

This standard establishes the requirements for drive pin blind rivets suitable for use in joining the component parts of an assembly.
DIN EN
DIN EN 28733
1992
English

Unhardened parallel pins with internal thread (ISO 8733 : 1986) English version of DIN EN 28 733

This International Standard specifies the characteristics of unhardened parallel pins with internal thread, with metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.
DIN EN
DIN EN 24034
1992
English

Hexagon nuts – Product grade C (ISO 4034 : 1986) English version of DIN EN 24 034

This International Standard gives specifications for hexagon nuts . with thread diameters from M5 to M64 inclusive and product grade C.