DIN 126

Product grade C washers designed for use with hexagon head bolts and nuts

English 1990

0.000

Detailed Information

This standard specifies requirements for product grade C washers. The preferred application of these washers is in product grade C hexagon head bolt/hexagon nut assemblies, with widths across flats as specified in ISO 272.

Download File

(Log in to download spec.)

Check out other specifications

DIN

DIN 926

1986

English

Slotted set screws with full dog point

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]

DIN

DIN 6913

1966

English

Spring Washers with Safety Ring

The surface of the spring washer and of the safety ring must be smooth and free from scale and burr. The spring washers must be coiled with constant pitch and without any kinks (with the excep [...]

DIN

DIN 8195

1977

English

Design and selection of chain drives

1.1 This standard contains capacity rating charts and gives recommendations on the selection of chain drives, composed of roller chains and chain wheels conforming to DIN 8187 and DIN 8188, and [...]

DIN EN

DIN EN 24034

1992

English

Hexagon nuts – Product grade C (ISO 4034 : 1986) English version of DIN EN 24 034

This International Standard gives specifications for hexagon nuts . with thread diameters from M5 to M64 inclusive and product grade C.

DIN

DIN 6797

1988

English

Toothed lock washers

The main purpose of toothed lock washers is to permit the flow of electric current between components coated by varnish, anti-corrosive agents or similar materials, the bent ends of the washers [...]

JIS

JIS B 1091

2003

English

Fasteners—Acceptance inspection

This Standard specifies the acceptance inspection procedure that the purchaser of fasteners must follow in order to determine whether a lot of fasteners will be accepted or rejected in cases wh [...]

DIN

DIN 662

1993

English

Oval-head rivets with nominal diameters from 1,6 to 6 mm

This standard specifies dimensions of steel and nonferrous metal oval-head rivets with nominal diameters from 1,6 to 6 mm.

SAE

SAE J1199

1983

English

MECHANICAL AND MATERIAL REQUIREMENTS FOR METRIC EXTERNALLY THREADED STEEL FASTENER

1.1 This standard covers the mechanical and material requirements for eight property classes of steel, externally threaded metric fasteners in sizes M1.6 through M36, inclusive, and suitable fo [...]

DIN

DIN 267-1

1982

English

Fasteners – Technical delivery conditions – General requirements

This standard applies to standardized fasteners (mainly bolts, screws, nuts and similar threaded and formed parts) as finished components in the condition on delivery, in so far as no special s [...]