DIN 1448-1

Conical Shaft Ends – with External Thread – Dimensions

English 1970
5.001
DIN
Detailed Information

For connection with ISO Recommendation ISO/R 775-1969, see Explanations.

Conical shaft ends are intended to take belt pulleys, couplings and gears.

Sizes and details such as chamfer, centre bore and surface quality, which are not specified, are to be designed as appropriate.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0202
1999
English

Parallel pipe threads

This standard specifies parallel pipe threads and is applicable to the threads used mainly for mechanical connection to joint the pipes, pipe fittings, fluid machinery, etc. The parallel inter [...]
ASTM
ASTM B689
2003
English

Standard Specification for Electroplated Engineering Nickel Coatings

1.1 This specification covers the requirements for electroplated nickel coatings applied to metal products for engineering applications, for example, for use as a buildup for mismachined or wor [...]
ASME
ASME B18.18
2011
English

QUALITY ASSURANCE FOR FASTENERS

This quality focused Standard establishes in-process and final inspection requirements for fastener products as well as a receiving inspection plan for fastener purchasers. This Standard identi [...]
DIN
DIN 525
1986
English

Weld studs

Weld studs are fasteners which are primarily selected because of their weldability. When determining what loadbearing capacity weld studs are to have, account shall be taken of their inherent s [...]
ASME
Abstract ASME B1.15
1995
English

UNIFIED INCH SCREW THREADS (UNJ THREAD FORM)

This standard establishes the basic triangular profile for the UNJ thread form, provides a system of designations, lists the standard series of diameter-pitch combinations for diameters from 0. [...]
DIN
DIN 7980
1972
German

Federringe für Zylindcrschrauhcn

Die Oberfläche der Federringe muß glatt und frei von Zunder und Grat sein. Die Federringe müssen ohne Knicke gewunden und ihre äußeren Kanten scharfkantig bis leicht gerundet sein.
ASTM
ASTM F468M
1997
English

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws. and studs in nominal thread diameters M6 to M36 inclusive manufactured from a number of a [...]
DIN
DIN 920
1986
English

Slotted pan head screws with small head

The following amendments have been made in comparison with the August 1972 edition. a) Size M1,8 has been deleted because there is no demand for it. b) The previous design m as specified in DIN [...]
DIN
DIN 267-19
1984
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Oberflächenfehler an Schrauben

Diese Norm ergänzt DIN 267 Teil 1 und Teil 2 sowie DIN ISO 898 Teil 1 und DIN ISO 4759 Teil 1. Sie enthält Festlegungen über die Ausschußkriterien für die verschiedenen Arten von Oberflächenfeh [...]