DIN 1587

Hexagon domed cap nuts

English 1987
0.000
DIN
Detailed Information

This standard specifies requirements for M 4 to M 24 coarse and fine pitch thread hexagon domed cap nuts assigned to product grade A or B.

If, in special cases, nuts are to comply with specifications other than those given in this standard, e.g. regarding property class, these shall be selected in accordance with the relevant standards.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 101
1993
English

Rivets – Technical delivery conditions

This standard specifies technical delivery conditions, test methods and acceptance conditions for all types of standardized rivets (except for blind rivets). These specifications are generally applicable but may deviate from the specifications of other relevant product standards, In which […]
DIN
DIN 933
1987
English

M 1,6 to M 52 hexagon head screws threaded up to the head – Product grades A and B

This standard specifies requirements for M1,6 to M52 hexagon head screws threaded up to the head, assigned to product grade A, for sizes up to M24 and length not exceeding 10d or 150mm, and to product grade B for sizes greater than M24 or length exceeding 10d or 150mm.
ASTM
ASTM A307
2010
English

CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH

1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs in sizes 1/4 in. through 4 in. The fasteners are designated by “Grade" denoting tensile strength and intended use, as follows: Grade | Description Grade A | Bolts and st […]
DIN
DIN 916
1980
English

Hexagon socket set screws with cup point – ISO 4029 modified

ISO 4029 specifies product grade A hexagon socket set screws with cup points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
JIS
JIS B 1176
2000
English

Hexagon socket head cap screws

This Standard specifies the characteristics of hexagon socket head cap screws with threads from M1.6 up to and including M64 and product grade A. Gauging of hexagon sockets is specified in Annex A. For approximate masses of screws see Annex B. If, in special cases, specifications other […]
DIN
DIN 7331
1993
English

Compression rivets

This standard specifies dimensions of, and technical delivery conditions for, steel and nonferrous metal compression rivets. Such rivets consist of two tubular parts, one of which is provided with a bore (rivet head) to receive the other (rivet body). In order to ensure proper assembly, b […]