DIN 186

T-head bolts with square neck

English 1988
0.000
DIN
Detailed Information

This standard specifies M 6 to M 48 T·head bolts with square neck. They are designed for use in attaching components to foundations or similar structures by means of T·slots (such as are specified in DIN 649), where T·head bolts with square neck are considered adequate detachable fasteners.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
Abstract of ASTM F871M
1991
English

ELECTRODE POSITED COATINGS ON METRIC THREADED COMPONENTS

1.1 This specification covers dimensional requirements for electrodeposited coating on threaded fasteners with M metric threads. It establishes a service condition classification for these fast [...]
ISO
ISO 7721
1983
English

Countersunk head screws – Head configuration and gauging

This International Standard specifies the Characteristics of head configurations of slotted and recessed countersunk head screws, and recommends a gauging method for the head dimensions laid do [...]
DIN
DIN 551
1972
English

Slotted Set Screws with Chamfered Ends

Compared with the April 1956 issue, the following amendments and additions should be noted: a) In agreement with the international selection of threads for screws and bolts, the sizes M 1.6, M [...]
ANSI
ANSI B18.2.3.6M
1995
English

METRIC HEAVY HEX BOLTS

1.1 This standard covers the complete general and dimensional data for metric heavy hex bolts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is [...]
DIN
DIN 268
1974
German

Tangentkeile und Tangentkeilnuten für stoßartige Wechselbeanspruchungen

Die vorliegende Norm entspricht sachlich dem ISO-Entwurf ISO/DIS 3117 -1973 Tangential keying Clavetage par clavettes tangentielles Tangentkeile und Tangentkeilnuten Dieser ISO-Entwurf enthält [...]
ISO
ISO 6506-1
2014
English

Metallic materials — Brinell hardness test — Part 1: Test method

This part of ISO 6506 specifies the method for the Brinell hardness test for metallic materials. It is applicable to both fixed location and portable hardness testing machines. For some specif [...]
ASTM
ASTM A449
1993
English

Standard Specification for Quenched and Tempered Steel Bolts and Studs

1.1 This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required. 1.2 [...]
DIN EN
DIN EN 28674
1992
English

Hexagon nuts, style 2, with metric fine pitch thread – Product grades A and B (ISO 8674 :1988) English version of DIN EN 28 674

This International Standard gives specifications for hexagon nuts, style 2, with metric fine pitch thread, with nominal thread diameters d from 8 mm up to and including 36 mm, with product grad [...]
DIN EN
DIN EN 10083-1
1991
English

Quenched and tempered steels – Technical delivery conditions for special steels – English version of DIN EN 10083 Part 1

1.1 This European Standard gives the technical delivery requirements for — semi-finished products, hot formed, e.g. blooms, billets, slabs (see notes 3 and 4), — bars (see note 3), — rod, — w [...]