DIN 188

T-head bolts with double nib

English 1987
0.000
DIN
Detailed Information

This standard specifies M 8 to M 80 X 6 T-·head bolts with double nib. They are designed for use in attaching components to foundations or similar structures by means of T-slots, such as are specified in DIN 649, where T-head bolts with square neck are considered adequate detachable fasteners.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 988
1990
English

Shim rings and supporting rings

Shim rings are designed to prevent machine components from moving axially. The preferred application of these rings is to compensate for the play of such components where secured by circlips as [...]
JIS
JIS B 0210
1973
English

Limits of sizes and tolerances for unified coarse screw threads

This Japanese Industrial Standard specifies limits of sizes and tolerances for unified coarse screw threads specified in JIS B 0206-Unified Coarse Screw Threads, mainly used for the purpose of [...]
JIS
JIS B 1054-2
2001
English

Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 2 : Nuts

This part of JIS B 1054 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic grades of corrosion- resistant stainless steels when tested over an ambient temp [...]
DIN EN
DIN EN 10269 Berichtigung 2
2007
German

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006, Berichtigungen zu DIN EN 10269:2006-07

Es wird empfohlen, auf der betroffenen Norm einen Hinweis auf diese Berichtigung zu machen.
DIN EN
DIN EN 26157-3
1991
English

Fasteners – Surface discontinuities – Bolts, screws and studs subject to special requirements (ISO 6157 -3 : 1988) (English version of DIN EN 26 157 Part 3)

This part of ISO 6157 establishes limits for various types of surface discontinuities on bolts, screws and studs for special requirements. It applies to bolts. screws and studs with - nominal [...]
NASM
NASM 35333
2003
English

WASHER, LOCK, FLAT-INTERNAL TOOTH

MATERIAL: Carbon Steel, Grade 1050 to 1064. hardness 40 to 50 HRC or equivalent. Corrosion-Resistant Steel, Composition 410. Corrosion-resistant Steel, 300 series (UNS S300XX), hardness 35-43HR [...]
ASTM
Abstract of ASTM A449
2000
English

QUENCHED AND TEMPERED STEEL BOLTS AND STUDS

This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required.
DIN
DIN 2095
1973
English

Helical Springs Made of Round Wire – Quality Specifications for Cold Coiled Compression Springs

This Standard applies to helical compression springs made of spring-hard round wire which, after cold coiling, are subjected only to tempering to relieve residual stresses. Cold coiled compress [...]
DIN
DIN 261
1987
English

T-head bolts

This standard specifies M8 to M100 x 6 T-head bolts. They are designed for use in attaching components to foundations or similar structures by means of T-sIots, such as are specified in DIN 649 [...]