DIN 267-18

Mechanische Verbindungselemente – Technische Lieferbedingungen – Teile aus Nichteisenmetallen

German 1981
0.000
DIN
Detailed Information

Diese Norm gilt für mechanische Verbindungselemente mit Gewinde (im wesentlichen Schrauben und Muttern) als Fertigteile aus Nichteisenmetallen (Schwermetalle und Leichtmetalle) mit
– metrischem ISO-Gewinde nach DIN 13,
– Blechschraubengewinde nach DIN 7970,
– Holzschraubengewinde nach DIN 7998
– und anderen Befestigungsgewinden bis zu Gewinde-Nenndurchmessern nach Tabelle 2.

Für größere Gewinde-Nenndurchmesser sind bezüglich der Werkstoffauswahl und der mechanischen Eigenschaften Vereinbarungen zu treffen.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 2903
1977
English

ISO metric trapezoidal screw threads – Tolerances

This International Standard specifies a tolerance system for metric trapezoidal screw threads according to ISO 2902. The tolerances refer to the basic profile according to ISO 2901. The tolera [...]
DIN
DIN 562
1987
English

Square thin nuts Product grade B

This standard specifies requirements for M1,6 to M10 square thin nuts assigned to product grade B. If, in special cases, nuts are to comply with specifications other than those given in this st [...]
SAE
SAE AS8879
2001
English

Screw Threads – UNJ Profile, Inch

This SAE Aerospace Standard (AS) specifies the characteristics of the UNJ profile inch series of screw threads, to include a mandatory controlled radius of 0.18142P to 0.15011P at the root of t [...]
ISO
ISO 2902
1977
English

ISO metric trapezoidal screw threads – General plan

This International Standard specifies a series of diameter and pitch combinations for ISO metric trapezoidal screw threads having the basic profile according to ISO 2901.
DIN
DIN 6930-2
1989
English

Steel stampings – General tolerances

This standard is intended to simplify drawings. It specifies general tolerances on linear and angular dimensions and on coaxiality and symmetry in four accuracy grades comprising f (fine), m(me [...]
DIN EN
DIN EN 10269 Berichtigung 2
2007
German

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006, Berichtigungen zu DIN EN 10269:2006-07

Es wird empfohlen, auf der betroffenen Norm einen Hinweis auf diese Berichtigung zu machen.
JIS
JIS B 1054-3
2001
English

Mechanical properties of corrosion-resistant stainless-steel fasteners— Part 3 : Set screws and similar fasteners not under tensile stress

This part of JIS B 1054 specifies the mechanical properties of set screws and similar fasteners not under tensile stress made of austenitic stainless steel when tested over an ambient temperatu [...]
ISO
ISO 2901
1977
English

ISO metric trapezoidal screw threads – Basic profile and maximum material profiles

This International Standard specifies the basic profile and maximum material profiles of ISO metric trapezoidal screw threads.
JIS
JIS B 0205-1
2001
English

ISO general purpose metric screw threads — Part 1: Basic profile

This Standard specifies the basic profile for ISO general purpose metric screw threads (M).