DIN 267-20

Mechanische Verbindungselemente – Technische Lieferbedingungen Oberflächenfehler an Muttern

German 1984
0.000
DIN
Detailed Information

Diese Norm ergänzt DIN 267 Teil 1, Teil 2, Teil 4, Teil 15 und Teil 23 sowie DIN ISO 898 Teil 2 und DIN ISO 4759 Teil 1. Sie enthält Festlegungen über die Ausschußkriterien für die verschiedenen Arten von Oberflächenfehlern an Muttern mit Festigkeitsklassen nach DIN ISO 898 Teil 2 bzw. DIN 267 Teil 4 und Teil 23 in Produktklassen A (Ausführung m) und B (Ausführung mg) und mit
Gewinde-Nenndurchmessern von 3 bis 39 mm.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0205-4
2001
English

ISO general purpose metric screw threads — Part 4: Basic dimensions

This Standard specifies the basic dimensions, in milimetres, of ISO metric screw threads in accordance with JIS B 0205-2. The values refer to the basic profile in accordance with JIS B 0205-1.
ASME
ASME B18.3
2012
English

Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)

This Standard covers complete general and dimensional data for various types of hexagon socket cap screws, shoulder screws, set screws, and hexagon keys recognized as an American National Stand [...]
DIN
DIN 444
1983
English

Eyebolts

This edition of DIN 444 contains corrections which had become necessary due to an incorrect correlation between limiting sizes and types in the October 1981 edition of the standard.
DIN EN
DIN EN 10083-2
2006
English

Steels for quenching and tempering – Part 2: Technical delivery conditions for non alloy steels – English version of DIN EN 10083-2:2006-10

This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for: — semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083 [...]
IFI
IFI-551
1999
English

METRIC STRUCTURAL FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

This standard establishes the dimensional, mechanical and performance requirements of metric structural flush break pull mandrel self-plugging blind rivets suitable for use in joining the compo [...]
ISO
ISO 7042
2012
English

Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12

This International Standard specifies the characteristics of prevailing torque type all-metal hexagon high nuts, with threads from M5 up to and including M36, in product grade A for threads up [...]
ASTM
ASTM A240/A240M
2011
English

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

1.1 This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications. 1.2 The values [...]
DIN
DIN 6907
1990
English

Serrated lock washers with external teeth for screw and washer assemblies

Serrated lock washers as specified in this standard are intended tor use with screw and washer assemblies as specified in DIN 6900 Part 4. Serrated lock washers are mainly designed to provide e [...]
DIN
DIN 2095
1973
English

Helical Springs Made of Round Wire – Quality Specifications for Cold Coiled Compression Springs

This Standard applies to helical compression springs made of spring-hard round wire which, after cold coiling, are subjected only to tempering to relieve residual stresses. Cold coiled compress [...]