DIN 267-4

Mechanische Verbindungselemente – Technische Lieferbedingungen – Festigkeitsklassen für Muttern (bisherige Klassen)

German 1983
0.000
DIN
Detailed Information

Im Jahre 1967 wurde die Norm DIN 267 Teil 4 auf internationale Festigkeitsklassen für Muttern umgestellt. Die alten Kennzeichen 4D, 5D, 5S, 6G, 6S und 8G wurden durch die Kennzahlen 4, 5, 6, 8, 10, 12 urid 14 ersetzt, wobei die Kennzahl 1/100 der Mindestzugfestigkeit (N/mm2) der Schraube entsprach, mit der die Mutter gepaart und bis zur Mindestzugfestigkeit der Schraube belastet werden konnte, z. B. Schraube 10.9 – Mutter 10. Entsprechende Prüfkräfte waren den Muttern zugeordnet.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7968
1999
English

Steel hexagon fit bolts for structural steel bolting, for supply with hexagon nuts

This standard specifies dimensions and technical delivery conditions for M12 to M30 steel hexagon fit bolts of product grade C for use in structural steel bolting. It also specifies the nut […]
DIN
DIN 558
1967
English

Hexagon Screws – Thread Approximately to Head – Metric Thread Type g

These screws are normally made in the sizes for which weight data are indicated. Sizes for which the weight data are emphasized by bold type are generally stocked commercially because they […]
ASTM
Abstract of ASTM B695
2000
English

COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL

1.1 This specification covers the requirements for a coating of zinc mechanically deposited on iron and steel basis metals. The coating is provided in several thicknesses up to and includin […]
DIN EN
DIN EN 22340
1992
English

Clevis pins without head (ISO 2340 : 1986) English version of DIN EN 22 340

This International Standard specifies the characteristics of clevis pins without head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
DIN
DIN 967
1994
English

Product grade A cross recessed pan head screws with collar

This standard specifies requirements for M 3 to M 8 cross recessed pan head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special screw types or […]
DIN
DIN 6900-1
1990
English

Screw and washer assemblies – Coarse threaded screws with captive plain washer

This standard specifies requirements for screw and washer assemblies consisting of an M 2,5 to M12 screw with flat bearing face, assigned to property class 10.9 or less, and a captive plain […]
DIN
DIN 913
1980
English

Hexagon socket set screws with flat point – ISO 4026 modified

ISO 4026 specifies product grade A hexagon socket set screws with flat points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
ASTM
ASTM A31
1995
English

Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

1.1 This specification covers steel rivets for use in boilers and pressure vessels and steel bars for use in the manufacture of rivets. 1.2 Two grades are covered: 1.2.1 Grade A-Bars havin […]
DIN
DIN 7964
1990
English

Reduced shank bolts and screws with coarse thread

This standard specifies requirements for M 2,5 to M 30 bolts and screws ('bolts', for short) with various head styles and a diameter of the unthreaded portion of the shank smaller than the […]