DIN 267-5

Mechanische Verbindungselemente – Technische Lieferbedingungen – Annahmeprüfung – ISO 3269 Ausgabe 1984 modifiziert

German 1986
0.000
DIN
Detailed Information

1.1 Diese Norm enthält ein Verfahren, welches der Besteller (Verbraucher) bei seiner Eingangsprüfung anwenden kann, um zu entscheiden, ob ein Los von Verbindungselementen, sofern bai Bestellung kein anderes Annahmeverfahren mit dem Lieferer vereinbart wurde, den festgelegten technischen Anforderungen entspricht.
Zusätzliche besondere Annahmeanforderungen können im Einzelfall in den Produktnormen aufgenommen werden (z. B. für Muttern mit Klemmteil).
Das Verfahren nach dieser Norm wird auch für Schiedsfälle angewandt.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7976
1972
English

Hexagon Head Tapping Screws

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical condi [...]
JIS
JIS B 0202
1999
English

Parallel pipe threads

This standard specifies parallel pipe threads and is applicable to the threads used mainly for mechanical connection to joint the pipes, pipe fittings, fluid machinery, etc. The parallel inter [...]
JIS
JIS B 1014
1994
English

Countersunk flat head screws— Part 2 : Penetration depth of cross recesses

This Standard specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).
ASME
ASME B18.3
2008
English

SOCKET CAP, SHOULDER, AND SET SCREWS, HEX AND SPLINE KEYS (INCH SERIES)

1.1.1 This Standard covers complete general and dimensional data for various types of hexagon and spline (fluted) socket cap screws, shoulder screws, set screws, and hexagon and spline keys rec [...]
ASTM
ASTM B695
2009
English

COATINGS OF ZINC MECHANICALLY DEPOSITED ON IRON AND STEEL

This specification covers the requirements for a coating of zinc mechanically deposited on iron and steel basis metals. The coating is provided in several thicknesses up to and including 107 μm [...]
DIN
DIN 1151
1973
English

Round plain head and countersunk head wire nails

Wire nails shall be made of steel (grade at manufacturer's discretion) and have a bright (bk), galvanized (zn) or metallized (me) finish.
DIN EN
DIN EN 10277-3
1999
German

Blankstahlerzeugnisse – Technische Lieferbedingungen Teil 3: Automatenstähle – Deutsche Fassung EN 10277-3 : 1999

1.1 Dieser Teil von EN 10277 gilt für blanke, gerade Stäbe aus Automatenstählen Im gezogenen, geschälten oder geschliffenen Zustand. 1.2 Diese EN 10277-3 wird vervollständigt durch EN 10277-1.
DIN
DIN 1816
1971
English

Round Nut with Set Pin Holes Inside – ISO Metric Fine Thread

Material (strength properties): at least 5 according to DIN 267 Part 4
JIS
JIS B 0209-5
2001
English

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

This Standard specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric internal screw threads conforming to JIS B 0205-3 having basic profile accord [...]