DIN 434

Square taper washers for use with channel sections

English 1990
0.000
DIN
Detailed Information

Washers as specified in this standard are intended for use in structural bolting of channel sections using bolts up to property class 5.6.

Download File
(Log in to download spec.)

Check out other specifications

IS
IS 1367-2
2002
English

TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 2 TOLERANCES FOR FASTENERS — BOLTS, SCREWS, STUDS AND NUTS — PRODUCT GRADES A, B AND C

This part of ISO 4759 specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product gr […]
DIN EN
DIN EN 28744
1992
English

Full-length taper grooved pins (ISO 8744 : 1986) English version of DIN EN 28 744

This international Standard specifies the characteristics of full-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with […]
DIN EN
DIN EN 27436
1992
English

Slotted set screws with cup point (ISO 7436 : 1983) English version of DIN EN 27 436

This International Standard specifies the characteristics of slotted set screws with cup point and thread sizes from M 1,6 to M 12 inclusive and product grade A.
DIN
DIN 982
1987
English

Prevailing torque type hexagon nuts with nonmetallic insert

This standard specifies requirements for M 5 to M 24 prevailing torque type hexagon nuts with nonmetallic insert, assigned to product grade A for sizes up to M 16 and product grade B for si […]
DIN
DIN 1624
1987
English

Cold reduced mild unalloyed steel strip in widths not exceeding 650mm – Technical delivery conditions

1.1 This standard applies to cold reduced flat products (strip and lengths cut from it), without coating, in widths not exceeding 650 mm and thicknesses up to 6mm, made from mild unalloyed […]
JIS
JIS B 0216
1987
English

Metric trapezoidal screw threads

This Japanese Industrial Standard specifies the combined nominal diameters and pitches, designation of screw threads, basic profiles, formulae and basic dimensions of the metric trapezoidal […]
JIS
JIS B 1015
2001
English

Hexalobular internal driving feature for bolts and screws

This Standard specifies the shape and basic dimensions of hexalobular internal driving feature for bolts and screws including the gauging method. The curvature of the contour of the hexalo […]
DIN
DIN 7976
1972
English

Hexagon Head Tapping Screws

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical c […]
ASTM
ASTM A29/A29M
2012
English

Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel […]