DIN 434
Square taper steel washers for use with channel sections
English
2000
0.000
Detailed Information
This standard specifies dimensions and technical delivery conditions for square taper washers for use in structural bolting of steel channel sections using bolts up to property class 5.6.
Download File
(Log in to download spec.)
Check out other specifications
2001
English
Fasteners—Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
This Standard specifies a preloading test which is able to detect the occurrence of hydrogen embrittlement of fasteners at room temperature. This test is applicable to — metric bolts, screws and studs; — thread rolling screws; — self-tapping screws; — self-drilling screws; — nuts; — wash […]
1991
English
STAINLESS STEEL SOCKET HEAD CAP SCREWS [METRIC]
1.1 This specification covers the chemical and mechanical requirements for stainless steel metric socket head cap screws (SHCS) with nominal thread M1.6 through M36 and intended for use in applications requiring general corrosion resistance.
1993
English
Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752
This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.
1998
English
Standard Specification for Electrodeposited Coatings on Threaded Components [Metric]
1.1 This specification covers dimensional requirements for electrodeposited coating on threaded fasteners with M metric threads. It establishes a service condition classification for these fasteners and specifies coating thicknesses as well as hydrogen embrittlement relief for high-streng […]
1986
English
Knurled nuts with collar
The following amendments have been made in comparison with the November 1970 edition. a) The content of the standard has been editorially revised and aligned with the basic standards concerned. b) The technical delivery conditions have been amended. c) The previous design m as specified I […]