DIN 466

Knurled nuts with collar

English 1986
0.000
DIN
Detailed Information

The following amendments have been made in comparison with the November 1970 edition.
a) The content of the standard has been editorially revised and aligned with the basic standards concerned.
b) The technical delivery conditions have been amended.
c) The previous design m as specified In DIN 267 Part 2 has been replaced by product grade F as specified in DIN 267 Part 6 and product grade A as specified in ISO 4759 Part 1. Tolerances have been Included.
d) Sizes M 1,7, M 2,3 and M 2,6 have been deleted. However, to cater for documents already In existence and spare parts requirements, they can still be ordered in accordance with the November 1970 edition of the present standard.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 125-1
1990
English

Product grade A washers with a hardness up to 250 HV designed for use with hexagon head bolts and nuts

This standard specifies requirements for product grade A washers with a hardness up to 250 HV, designed for use with bolts of properly class 8.8 or less. The preferred application of these […]
DIN
DIN 912
1983
English

Hexagon socket head cap screws (modified version of ISO 4762)

This standard specifies product grade A hexagon socket head cap screws with metric screw threads and thread diameters from 1,4 to 100 mm. If, in exceptional cases, the screws are to meet re […]
DIN
DIN 7516
1995
English

Cross recessed head thread cutting screws – Dimensions, requirements and testing

This standard specifies dimensions, requirements and test methods for heat-treated cross recessed head thread cutting screws with an ISO metric thread as specified in DIN 13-12, with cuttin […]
DIN
DIN 7976
1972
English

Hexagon Head Tapping Screws

Normally, these tapping screws are made in the sizes for which weight details are given. It is not practicable to make the sizes for which dashes appear instead of length data. Technical c […]
SAE
SAE J123
1994
English

SURFACE DISCONTINUITIES ON BOLTS, SCREWS, AND STUDS IN FATIGUE APPLICATIONS

This SAE Recommended Practice defines, illustrates, and specifies allowable limits for various types of surface discontinuities that may occur or become apparent during the manufacture and […]
DIN
DIN 127
1970
English

Spring Lock Washers Barbed or Plain with Rectangular Cross-section

The surface of the spring lock washers must be smooth and free from scale and burr. The spring lock washers must be coiled without kinks and their outer edges must be sharp or at the most l […]
DIN
DIN 7985
1990
English

Cross recessed raised cheese head screws

This standard specifies requirements for M1,6 to M10 cross recessed raised cheese head screws assigned to product grade A. See DIN 962 (or the standards referred to therein) for special fea […]
ASTM
ASTM A574M
1998
English

Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]

1.1 This specification covers the requirements for quenched and tempered alloy steel socket-head cap screws 1.6 mm through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.
ISO
ISO 1302
2002
English

Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation

This International Standard specifies the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of grap […]