DIN 467

Knurled nuts

English 1986
0.000
DIN
Detailed Information

The following amendments have been made in comparison with the November 1970 edition.
a) The content of the standard has been editorially revised and aligned with the basic standards concerned.
b) The technical delivery conditions have been amended.
c) The previous design m as specified in DIN 267 Part 2, April 1968 edition, has been replaced by product grade F as specified in DIN 267 Part 6 and product grade A as specified In ISO 4759 Part 1
d) Sizes M 1,7, M 2,3 and M 2,6 have been deleted. However, to cater for documents already in existence and spare parts requirements, they can still be ordered in accordance with the November 1970 edition of the present standard.

Download File
(Log in to download spec.)

Check out other specifications

JIS
JIS B 0147
2004
English

Blind rivets—Terminology and definitions

This Standard specifies the terminology and definitions for types, performance characteristics and geometry for blind rivets and the terminology for blind rivet setting and setting equipment us [...]
DIN EN
DIN EN 24017
1992
English

Hexagon head screws – Product grades A and B (ISO 4017:1988) English version of DIN EN 24 017

This International Standard gives specifications for hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and [...]
ANSI
ANSI B18.2.3.5M
1995
English

METRIC HEX BOLTS

1.1 This standard covers the complete general and dimensional data for metric hex bolts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is not i [...]
DIN
DIN 607
1981
English

Cup head nib bolts

The "with hexagon nut according to DIN 555" type is no longer contained in the representation of the cup head bolts. However, this type may still be ordered as part of this standard according t [...]
ASTM
Abstract of ASTM F835
2000
English

ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) 0.060 through 0.625 in. thread sizes and flat countersunk (SFHCS) 0.060 throug [...]
ASTM
ASTM F568M
1996
English

Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners

1.1 This specification covers chemical and mechanical requirements for nine property classes of carbon and alloy steel externally threaded metric fasteners in nominal thread diameters M1.6 thro [...]
SAE
SAE J429
2011
English

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS

This SAE standard covers the mechanical and material requirements for inch-series steel bolts, screws. studs. screws for sems, and U-bolts used in automotive and related industries in sizes to [...]
DIN
DIN 1681
1985
English

Cast steels for general engineering purposes – Technical delivery conditions

1.1 This standard applies to the grades of cast steel listed in table 1 with specified minimum values for the mechanical properties at ambient temperature. The castings made from these steels a [...]
DIN
DIN 8195
1977
English

Design and selection of chain drives

1.1 This standard contains capacity rating charts and gives recommendations on the selection of chain drives, composed of roller chains and chain wheels conforming to DIN 8187 and DIN 8188, and [...]