DIN 478

Square head bolts with collar

English 1985
0.000
DIN
Detailed Information

This standard specifies product grade A square head bolts with collar and M 5 to M 24 coarse thread.
Where, for special purposes, the bolts are to meet requirements differing from those specified in the present standard, e. g. in respect of nominal length or property class, the specifications of the relevant standards shall be complied with.

Download File
(Log in to download spec.)

Check out other specifications

BS EN
BS EN 1665
1997
English

Hexagon bolts with flange — Heavy series

This European Standard specifies characteristics of hexagon bolts with flange, heavy series, with threads from M5 up to and including M20 and with property classes 8.8, 10.9 and A2-70.
DIN
DIN 6901
1990
English

Tapping screw and washer assemblies

This standard specifies requirements for screw and washer assemblies consisting of a tapping screw with f!at bearing face and a DIN 6903 captive washer
ISO
ISO 10664
2005
English

Hexalobular internal driving feature for bolts and screws

This International Standard specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contou [...]
ISO
ISO 3506-2
2009
English

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts

This part of ISO 3506 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient [...]
DIN
DIN 7346
1978
English

Spring-Type Straight Pins (Roll Pins) Light-weight Type

Spring-type straight pins (also known as roll pins) to this Standard are pins made of spring steel, rolled from strip and having a slot along their length and one or two chamfers to permit inse [...]
ASTM
ASTM F812/F812M
1997
English

Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts with nominal diam [...]
DIN
DIN 7987
1972
German

Senkschrauben mit Kreuzschlitz (Senkköpfe bisherige Form)

Senkschrauben nach dieser Norm sind für eine z. Z. noch unbestimmte Dauer nur noch für Ersatzbedarf und nur noch für bereits vorhandene Konstruktionen anzuwenden. Für Neukonstruktionen sind ans [...]
EN ISO
EN ISO 3506-1
1997
English

Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs

This pan of ISO 3506 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic grades of corrosion-resistant stainless steels when tested over [...]
JIS
JIS B 1042
1998
English

Fasteners—Surface discontinuities— Part 2 : Nuts

This Standard establishes limits for various types of surface discontinuities on nuts. It applies to nuts with — nominal thread diameters from 5 mm up to and including 39 mm; — product grade [...]