DIN 547

Round nuts with drilled holes in one face

English 1986
0.000
DIN
Detailed Information

Round nuts with drilled holes in one face are parts generally made of steel, stainless steel or non-ferrous metals, which are designed to be used for various purposes, as for instance in electrical engineering. They can be tightened by means of a pin type face wrench as specified m DIN 3116 and are intended to be used for locking components where no specific prestressing forces or a specific resistance to stripping are required.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 7970
1984
English

Threads and thread ends for tapping screws (modified version of ISO 1478)

This standard specifies the thread and thread ends of tapping screws of thread sizes from ST 1,5 up to and including ST 9,5.
DIN
DIN 6915
1989
English

High-strength hexagon nuts with large widths across flats for structural steel bolting

Hexagon nuts as specified in this standard are intended for use in GV and SL structural steel bolting in accordance with DIN 18 800 Part 1, together with DIN 6914 bolts.
IFI
IFI-134
2008
English

MULTI-GRIP FLUSH BREAK PULL MANDREL SELF-PLUGGING BLIND RIVETS

This standard establishes the dimensional, mechanical and performance requirements of multi-grip flush break, positive lock pull mandrel self-plugging blind rivets suitable for use in joining t [...]
ISO
ISO 12683
2004
English

Mechanically deposited coatings of zinc — Specification and test methods

This document specifies the requirements for coatings of zinc that have been mechanically deposited on to fabricated metal articles to protect them from corrosion. It also describes the related [...]
ASME ANSI
ASME/ANSI B18.18.4M
1987
English

INSPECTION AND QUALITY ASSURANCE FOR FASTENERS FOR HIGHLY SPECIALIZED ENGINEERED APPLICATIONS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans, inspection freq [...]
ASTM
ASTM A368
2009
English

Standard Specification for Stainless Steel Wire Strand

1.1 This specification covers stainless steel wire strand composed of a multiplicity of round wires and suitable for use as guy wires, overhead ground wires, and similar purposes. 1.2 The value [...]
ISO
ISO 2936
2001
English

Assembly tools for screws and nuts — Hexagon socket screw keys

This International Standard specifies the dimensions, method of test, designation and marking of hexagon socket screw keys. It also specifies the minimum values of Rockwell hardness that shall [...]
DIN EN
DIN EN 28735
1992
English

Hardened parallel pins with internal thread (ISO 8735 : 1987) English version of DIN EN 28 735

This International Standard specifies the characteristics of through hardened and case hardened parallel pins with internal thread, metric dimensions and nominal diameters, d1, from 6 to 50 mm [...]
ASTM
Abstract of ASTM F738M
1997
English

STAINLESS STEEL METRIC BOLTS, SCREWS, AND STUDS

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric bolts, screws, and studs with nominal thread diameters M1.6 through M36, and intended for use i [...]