DIN 557

Product grade C square nuts

English 1994
0.000
DIN
Detailed Information

This standard specifies requirements for M 10 to M 12 square nuts assigned to product grade C. See DIN 962 (or
the standards referred to therein) for special nut types or finishes.
If, in special cases, nuts are to comply with specifications other than those given in this standard (e.g. regarding
property class or material), these shall be selected in accordance with the relevant standards.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 1152
1973
English

Round lost head wire nails

Wire nails shall be made of steel (grade at manufacturer’s discretion) and have a bright (bk) or galvanized (zn) finish.
DIN
DIN 6884
1956
English

Taper Key Torque Transmission – Gib-head Parallel Keys – Dimensions and Application

No figures tor permissible variations of tapers on keys and in hub keyways have so tar been laid down. If, in special cases, certain prescribed permissible variations must be observed, these mu [...]
ASTM
ASTM F879M
1991
English

Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal thread [...]
ISO
ISO 14584
2001
English

Hexalobular socket raised countersunk head screws

This International Standard specifies the characteristics of hexalobular socket raised countersunk head screws in product grades A and with thread sizes from M2 to M10 inclusive.
JIS
JIS B 0101
1994
English

Screw threads and fasteners — Vocabulary

This Japanese Industrial Standard specifies the terms and definitions related to the "fundamentals of screw thread" and "threaded fasteners (including washers, pins and rivets)" of the screw th [...]
DIN EN
DIN EN 10269 Berichtigung 1
2006
German

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen; Deutsche Fassung EN 10269:1999 + A1:2006, Berichtigungen zu DIN EN 10269:2006-07; Deutsche Fassung EN 10269:1999/A1:2006/AC:2006

Es wird empfohlen, auf der betroffenen Norm einen Hinweis auf diese Berichtigung zu machen.
ASTM
ASTM A29/A29M
2012
English

Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

1.1 This specification covers a group of common requirements which, unless otherwise specified in the purchase order or in an individual specification, shall apply to carbon and alloy steel bar [...]
ASME
ASME B18.7
2007
English

GENERAL PURPOSE SEMI-TUBULAR RIVETS, FULL TUBULAR RIVETS, SPLIT RIVETS, AND END CAPS

This Standard covers complete general and dimensional data for semi-tubular rivets, full tubular rivets, split rivets, and rivet caps for use in general purpose applications. The products descr [...]
ASTM
ASTM A563M
1997
English

Standard Specification for Carbon and Alloy Steel Nuts [Metric]

1.1 This specification covers chemical and mechanical requirements for eight property classes of hex and hex-flange carbon and alloy steel nuts for general structural and mechanical uses on bol [...]