DIN 603

Mushroom head square neck bolts

English 1981
0.000
DIN
Detailed Information

This standard specifies mushroom head square neck bolts with metric threads M 5 to M 20 of product grade C.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 2768-1
1989
English

General tolerances — Part 1 : Tolerances for linear and angular dimensions without individual tolerance indications

This part of ISO 2768 is intended to simplify drawing indications and it specifies general tolerances for linear and angular dimensions without individual tolerance indications in four toleranc [...]
DIN
DIN 910
1992
English

Heavy-duty hexagon head screw plugs

This standard specifies dimensions and technical delivery conditions for screw plugs which are intended to be screwed into holes with parallel thread as specified in DIN 13 Part 5, 6 or 7, or I [...]
DIN EN
DIN EN 1665
1998
German

Sechskantschrauben mit Flansch – schwere Reihe – Deutsche Fassung EN 1665 : 1997

Diese Europäische Norm legt Eigenschaften für Sechskantschrauben mit Flansch, schwere Reihe, mit Gewinde von M5 bis M20 und mit Festigkeitsklassen 8.8, 10.9 und A2-70 fest.
JIS
JIS B 1082
1987
English

Stress area and bearing area for threaded fasteners

This Japanese Industrial Standard specifies the stress area of metric screw thread and the area of the part where a load due to the contact of the bearing surface of threaded fastener and the o [...]
ISO
ISO 8677
1986
English

Cup head square neck bolts with large head – Product grade C

This International Standard specifies the characteristics of cup head square neck bolts with large head, with metric dimensions and thread sizes from M5 to M20 inclusive, of product grade C.
DIN
DIN 267-15
1983
English

Fasteners – Technical delivery conditions – Prevailing torque type nuts

The property classes, mechanical and performance properties and the methods of test listed in this standard apply to prevailing torque type nuts - with nominal thread diameters from 3 to 39 mm; [...]
DIN EN
DIN EN 28750
1992
English

Coiled, standard duty spring-type straight pins (ISO 8750 : 1987) English version of DIN EN 28 750

This International Standard specifies the characteristics of standard duty coiled spring-type straight pins with metric dimensions and nominal diameters, d1, from 0,8 to 20 mm inclusive.
DIN EN
DIN EN 28765
1992
English

Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765 : 1988) English version of DIN EN 28 765

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diame [...]
DIN
DIN 918 Supplement 3
2001
English

Overview of European Standards for fasteners

This Supplement reflects the most recent state of European standardization of fasteners by including: a) a list of DIN EN Standards classified by subject, and the correlated DIN Standards and D [...]