Check out other specifications
1983
German
Mechanische Verbindungselemente – Technische Lieferbedingungen – Muttern mit Klemmteil
Die in dieser Norm aufgeführten Festigkeitsklassen, die mechanischen und funktionellen Eigenschaften und die Prüfverfahren gelten für Muttern mit Klemmteil - mit Gewinde-Nenndurchmesser von 3 bis 39 mm - mit Metrischem ISO-Gewinde nach den Normen der Reihe DIN 13 - mit Formen nach den ent […]
2004
English
GAGING FOR DRYSEAL PIPE THREADS (INCH)
The scope of this Standard is to provide information regarding practical dryseal thread inspection methods and commonly used gages for production evaluation purposes. All dimensions are in inches unless otherwise specified.
1995
English
Conical spring washers for screw and washer assemblies
This standard specifies dimensions and technical delivery conditions for conical spring washers which are intended for use with screw and washer assemblies as specified in DIN 6900-5. They are designed for use with bolted connections with bolts of property classes 8.8 to 10.9 (as specifie […]
1998
English
Technical drawings — Screw threads and threaded parts — Part 2 : Screw thread inserts
This part of JIS B 0002 specifies methods for the representation of screw thread inserts on technical drawings.
1992
English
Hardened parallel pins with internal thread (ISO 8735 : 1987) English version of DIN EN 28 735
This International Standard specifies the characteristics of through hardened and case hardened parallel pins with internal thread, metric dimensions and nominal diameters, d1, from 6 to 50 mm inclusive.
2006
English
CARBON AND ALLOY STEEL COMPRSSIBL-WASHER-TYPE DIRECT TENSION INDICATORS FOR USE WITH CAP SCREWS, BOLTS, ANCHORS, AND STUDS
1.1 This specification covers the requirements for carbon and alloy steel compressible-washer-type direct tension indicators capable of indicating a specified bolt tension in cap screws, bolts, anchors, and studs. 1.2 Direct tension indicators in nominal diameter sizes 1/4 through 2-1/2 i […]