DIN 6325

Zylinderstifte, gehärtet – Toleranzfeld m6

German 1971
0.000
DIN
Detailed Information

Zylinderstifte nach dieser Norm werden hauptsächlich als Poßstifte für Werkzeuge, Spannzeuge und Meßzeuge verwendet.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM A394
1993
English

Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

1.1 This specification covers the chemical and mechanical requirements of hexagon and square-head zinc-coated steel bolts and atmospheric corrosion-resistant bolts, in nominal thread diameters [...]
DIN EN
DIN EN 1661
1998
English

Hexagon nuts with flange (ISO/DIS 4161 : 1996, modified) English version of DIN EN 1661

This European Standard specifies the characteristics of hexagon nuts with flange, with threads from M5 to M20 inclusive, of product grade A for threads up to and including M 16 and product grad [...]
DIN
DIN 914
1980
English

Hexagon socket set screws with cone point – ISO 4027 modified

ISO 4027 specifies product grade A hexagon socket set screws with cone points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
BS EN
BS EN 10025-6
2009
English

Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (chemic [...]
ISO
ISO 887
1983
English

Plain washers for metric bolts, screws and nuts – General plan

This International Standard lays down the specification for the full range of plain washers of product grades A and C for bolts, screws and nuts with thread sizes from M 1 to M 150 inclusive. [...]
ASME
ASME B18.5.2.3M
1998
English

ROUND HEAD SQUARE NECK BOLTS WITH LARGE HEAD [METRIC SERIES]

This standard covers the complete general and dimensional data for metric series round head square neck bolts with large head recognized as American National Standard.
ANSI
ANSI B18.22M
1990
English

METRIC PLAIN WASHERS

This standard covers general specifications and dimensions for flat, round hole washers, both soft (as fabricated) and hardened, intended for use in general purpose applications. The inclusion [...]
DIN
DIN 444
1983
English

Eyebolts

This edition of DIN 444 contains corrections which had become necessary due to an incorrect correlation between limiting sizes and types in the October 1981 edition of the standard.
DIN
DIN 671
1981
English

Bright round steel – Dimensions Permissible deviations – according to ISO tolerance zone h9

This standard applies to bright round steel of nominal diameters from 1 to 150 mm, made of the steels listed in clause 5. Details as to finish and lengths to be delivered are given in clause 6.